Abstract:This work proposes a simplified model and a unified model to predict the critical gas velocities of film reversal based on the conservative momentum principle. The simplified model is expressed by an analytical solution of dimensionless form, while the unified model is presented by an iterative solution. The measured datasets of different pipe angles and diameters from the present and published works were used for model evaluation. The proposed simplified model is recommended to predict the film reversal because it can accurately predict the critical velocity with the total relative errors of 10.18% in the laboratory and 27.03% in the field, outperforming the unified model and published models. The unified model has a total relative error of 11.56% in the laboratory and 34.26% in the field. The contributions of the proposed two models are discussed by model comparisons. The results show that the simplified model integrates the merits of simple form and high accuracy; but, owing to the simplifications, the simplified model is not rigorous in the mechanism. In contrast, the unified model is more rigorous because it considers the interior liquid film viscosity, the droplet entrainment, and the non-uniform film thickness distribution in inclined pipes. The superiority of the unified model is discussed by comparing it with previous models in vertical and inclined pipes. The unified model contributes to understanding the underlying mechanism of film reversal. In general, the proposed simplified model and unified model complement each other to improve the prediction of the film reversal practically and theoretically.

APPLICATION OF DIFFERENT TURBULENT MODELS IN CALCULATION OF FLOW RESISTANCE IN PIPELINES AND COMPARISON THEREOF

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Numerical Simulation of Tunnel Flow with a Concave-Convex Boundary

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Prediction of Mean Turbulent Flow Velocity in a Permeable-Walled Pipe

The Research on Flow Resistance of Transportation in Pipeline by a Model Test Stand

Transient Friction Models in Pressurized Pipes

Evaluation of Flow Resistance in Smooth Rectangular Open Channels with Modified Prandtl Friction Law

Study on Flow Field in an Elbow Draft Tube by 3D Numerical Simulation

Prediction of the liquid film reversal of annular flow in vertical and inclined pipes

A multi-state description of roughness effects in turbulent pipe flow

A unified friction factor formulation: Bridging laminar and turbulent friction factor with critical points analysis

PIECEWISE APPROXIMATION STATE SPACE MODELS OF DISTRIBUTED PARAMETER LIQUID PIPES

Comparison of Heat Transfer and Friction in Pipes With Various Internal Roughness

Influence of local energy loss at junctions on hydraulic calculation of pipeline network

Friction pressure drop model of gas-liquid two-phase flow in an inclined pipe with high gas and liquid velocities

Optimization and Extended Applicability of Simplified Slug Flow Model for Liquid-Gas Flow in Horizontal and Near Horizontal Pipes

Pipe Roughness Identification of Water Distribution Networks: The Full Turbulent Case

Numerical simulation of pressure loss and flow characteristics in combined elbow pipes for solid-liquid two-phase flow

With Modified Prandtl Friction Law

EFFECTS OF VISCOSITY ON EQUATION OF MOTION AND CRITICAL FLOW VELOCITY OF FLUID-CONVEYING PIPE