Abstract:With the development of voltage level and capacity in recent years, the impact of external short circuit has a growing threat to the stability of transformer windings than ever before. Because of the weakness of anti-short-circuit capacity, around 40% of the transformer faults are caused by the huge impact of short circuit every year. In view of this, it is of great significance to study the mechanical behavior of transformer winding structures during external short-circuit faults. This paper represents investigations of short-circuit current, the transient leakage magnetic field, electromagnetic forces and the von Mises stress of a real full-scale 500kV single-phase two windings transformer during the external short-circuit transient process. The worst case of short-circuit fault with three-phase short-circuit happening simultaneously has been simulated. A circuit model has been built up to get the short-circuit current. The 3D geometric model has been established based on real size parameters of the DFP334000/500kV single-phase two windings oil-immersed power transformer. The 3D finite-element method (FEM) has been employed to calculate the leakage magnetic fields excited by the short-circuit current. Henceforth, the electromagnetic forces acting on windings have been obtained and analyzed according to the short-circuit current and magnetic fields calculation results, and both axial and radial dynamical responses are considered and analyzed. The mechanical characteristics of the winding disks and the insulation structures have been calculated in this paper. The von Mises stress is the crucial factor to determine whether or not the transformer windings can withstand the impact of external short-circuit current, and its distribution has been simulated and analyzed.

Simulation for Magnetic Inrush and Fault Current of Three-Phase Transformer Based on EMTDC

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

A New Method to Identify Inrush Current Based on HHT

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Modeling And Simulation Of Magnetizing Inrush Current Of Large Power Transformers

A Research for Internal Fault Simulation of Single Phase Transformer Based on the Magnetic Transient and Support Vector Machine

Research on Internal Fault Simulation Model of Three-Phase Three-Limb Transformer Based on Magnetic Transient

Modeling and Simulation of Transformer Inter-Turn Short-Circuit Faults Based on Field-Circuit Coupling

A New Research for Internal Fault Simulation Model of Transformer

Modelling implementation and simulation differential relay with effect inrush current in transformers power systems using matlab

Simulation of Transformer Windings Mechanical Characteristics During the External Short-Circuit Fault

Simulation Analysis of Magnetizing Inrush Current of 500kV Transformer

Discrimination of Three-Phase Three-Limb Transformer Inrush Current Based on Characteristics of Instantaneous Excitation Inductances

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

FE-based equivalent circuits for simulating transformer internal faults

Analysis of Electromagnetic Transients of Three-phase Transformer's Non-synchronous Closing and Its Influence on Protection

Simulation of Internal Fault of Three-Phase Five-Leg Transformer

Wide-band Modeling of HVDC Converter Transformer for EMTP and Its Application on Fault Analysis

Simulation Analysis of Transformer Short Circuit Fault

Study of Transformer Recovery Inrush After Clearance of External Faults