Abstract:With the development of voltage level and capacity in recent years, the impact of external short circuit has a growing threat to the stability of transformer windings than ever before. Because of the weakness of anti-short-circuit capacity, around 40% of the transformer faults are caused by the huge impact of short circuit every year. In view of this, it is of great significance to study the mechanical behavior of transformer winding structures during external short-circuit faults. This paper represents investigations of short-circuit current, the transient leakage magnetic field, electromagnetic forces and the von Mises stress of a real full-scale 500kV single-phase two windings transformer during the external short-circuit transient process. The worst case of short-circuit fault with three-phase short-circuit happening simultaneously has been simulated. A circuit model has been built up to get the short-circuit current. The 3D geometric model has been established based on real size parameters of the DFP334000/500kV single-phase two windings oil-immersed power transformer. The 3D finite-element method (FEM) has been employed to calculate the leakage magnetic fields excited by the short-circuit current. Henceforth, the electromagnetic forces acting on windings have been obtained and analyzed according to the short-circuit current and magnetic fields calculation results, and both axial and radial dynamical responses are considered and analyzed. The mechanical characteristics of the winding disks and the insulation structures have been calculated in this paper. The von Mises stress is the crucial factor to determine whether or not the transformer windings can withstand the impact of external short-circuit current, and its distribution has been simulated and analyzed.

Simulation Analysis of Transformer Short Circuit Fault

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Simulation of Transformer Windings Mechanical Characteristics During the External Short-Circuit Fault

Modeling and Simulation of Transformer Inter-Turn Short-Circuit Faults Based on Field-Circuit Coupling

Simulation and analysis of short circuit fault in ship power system based on simulink

Influence of load-side transformers and grounding impedance on short-circuit fault simulation

Fault Analysis And Simulation Of Ground-Fault Accident On Transformer In 500 Kv Ac/Dc Grids

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

Simulation and Analysis of Power Transformer Winding Vibration and Deformation under External Short-circuit Faults

Analysis of a 110kV Transformer Near-Area Short-Circuit Fault Resulting in Winding Deformation and Management Measures

Simulation and Analysis of Dynamic Characteristics of Transformer Winding in Short-Circuit Fault by Finite Element Method

Comparative analysis of the characteristics of outlet short circuit and winding insulation fault of distribution transformer and its preventive measures

Fault Analysis and Simulation of the Short Circuit in High-Power Fusion Magnet Power Supply

Simulation and Analysis of Power Transformer Internal Arcing Faults Overpressure Characteristics

Analysis and Technical Improvements on Close-in Short Circuit Fault of Transformer

Computation and Analysis of Power Transformer Winding Damage Due to Short Circuit Fault Based on 3-D Finite Element Method

Analysis of short-circuit model for DC traction supply system

Simulation of Short Circuit to Ground of Transformer Winding Based on MTL Model

Modeling and Analysis of Oil Flow Distribution in Oil-Immersed Transformer Under External Fault

Investigation on Interturn Short-Circuit Faults in an Onboard Traction Transformer for High-Speed Railway