Abstract:Power transformers are the most expensive and important component in the power system, and may be subjected to breakdown due to mechanical and/or electrical faults. It is difficult to obtain the condition of the power transformer by only one test method, so transformer fault diagnosis based on different experimental and simulation methods is widely recommended. In this paper, the transformer winding faults diagnosis based on FEM simulation and on-site experiments is described. Based on the FEM simulation, it is necessary to analyze the effect of the winding faults on the change of the electrical parameters. The typical types of winding faults, such as axial displacement, and radial deformation, etc. are taken into consideration. Different fault degrees are investigated in the simulation analysis. Using the parameters calculated in the FEM model, an equivalent circuit of the power transformer is present in ATP/EMTP to study the performance of typical on-site experiments, such as frequency response analysis (FRA) and short-circuit impendence (SCI) test. The frequency bands, which might be treated as the diagnostic bands in the FRA, are simulated and compared. It is found that the resonances in the frequency bands of 200-250 kHz and 350-450 kHz are able to describe the situation, where the displacement percentage of the winding is varying from 0% to 9%. The SCI values under different fault severity are also obtained and compared. Therefore, the diagnosis method can directly bridge the types and degrees of the winding faults with the experiment results. The operating states of several 110 kV power transformers are tracked, and it can be found that the simulation results show a better consistency with the on-site experiment results, and the proposed diagnosis method will help to discriminate the winding faults.

Simulation of Transformer Windings Mechanical Characteristics During the External Short-Circuit Fault

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Simulation and Analysis of Power Transformer Winding Vibration and Deformation under External Short-circuit Faults

Analysis of Mechanical Characteristics of Transformer Windings under Short Circuit Fault

Simulation and Analysis of Dynamic Characteristics of Transformer Winding in Short-Circuit Fault by Finite Element Method

Computation and Analysis of Power Transformer Winding Damage Due to Short Circuit Fault Based on 3-D Finite Element Method

Study on the Damage to Transformer Windings under Multiple Short-Circuit Faults

Deformation Simulation and Analysis of Power Transformer Windings

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

Numerical and Experimental Investigations on Transformer Winding Damages under Multiple Short-Circuit Faults

Research on Dynamic Response of Power Transformer Windings under Short Circuit Condition

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Numerical Investigations for Vibration and Deformation of Power Transformer Windings under Short-Circuit Condition

Dynamic Deformation Analysis of Power Transformer Windings under Multiple Short-Circuit Impacts

Mechanical Characteristics Analysis of Defective Transformer Windings under Short-Circuit Fault Using 3-D FEM

Analysis Method of Transformer Fatigue Life and Damage under Multiple Short-circuit Conditions

Modeling and Analysis of Oil Flow Distribution in Oil-Immersed Transformer Under External Fault

Kinetic characteristics of transformer windings under short circuit condition

Simulation Analysis of Transformer Short Circuit Fault

Steady-state Analysis of Internal Short Circuits of Multi-winding Power Transformer Part Ⅰ Modeling and Simulations

Diagnosis of Transformer Winding Faults Based on Fem Simulation and On-Site Experiments