Research of wave display system based on 12864 LCD

Da-wei PAN,Pu HUANG

DOI: https://doi.org/10.3969/j.issn.1671-1041.2008.03.018

2008-01-01

Abstract:The paper presents a wave display system composed of C8051F005 MCU and 12864 LCD,and the system can sample and display all kinds of signals with complicated wave form.What's more it can measure and display the amplitude and frequency of the signal.

What problem does this paper attempt to address?

Design of VGA displaying and Laser printing System Based on C8051F

SHI YONGLE,WANG PEIYONG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.02.004

2007-01-01

Abstract:An output system is designed based on ATMEGA128 and CPLD, which can control a VGA monitor and a laser printer.AT-MEGA128 can display pictures and characters on a VGA monitor as well as print any information on the monitor.The design over-comes the shortcomings of a MCU system and provides a solution to other embedded systems displaying and printing information.
Passively Addressed FLC Display Possessing an Inherent Gray Scale and Memory

E. P. Pozhidaev,V. G. Chigrinov,Yu. P. Bobilev,V. M. Shoshin,A. A. Zhukov,A. L. Andreev,I. N. Kompanets,Li Xihua,E. E. Gukasjan,P. S. Komarov,O. A. Shadura,H. S. Kwok

DOI: https://doi.org/10.1889/1.2235695

2006-01-01

Journal of the Society for Information Display

Abstract:Abstract— A passively addressed 64 × 64 ferroelectric liquid‐crystal display (FLCD) has been developed. The display matrix has a 33 × 33 mm2 aperture, and the FLC layer thickness is 5.2 ± 0.2 μm. The display device operates with a frame frequency of 30 Hz (at Vrow = ±18 V, Vcol = ±9 V, T = 23°C), generating a continuous gray scale which can be memorized for more than 10 days after the driving voltage is switched off. A new approach for multiplex electronic addressing of the FLCD gray scale is proposed. The conditions of the hysteresis‐free gray‐scale generation for multiplex addressing and the gray‐scale memorization after the voltage is switched off, as well as the time steadiness of memorized images, are considered.
Design of multi-functional portable electronic experimental box based on Labview and ARM

Jiang Junmin,Hao Ziyi,Lan Fan,Yao Yingying

DOI: https://doi.org/10.3969/j.issn.1672-1438.2011.07.022

2011-01-01

Abstract:The multi-functional portable electronic experimental box is based on ARM7 LPC2148 32-bit microcontroller,integrating DDS digital phase synthesis signal generator AD9850,cooperating with computer's communication system and the sound card's signal collection system,and making use of a computer host process developed by Labview.After data collection,computer programs process and display the data to work as a virtual oscilloscope.The whole system and the circuit boards equipped with the common devices are placed in a small box,providing portable test environment.It brings convenience to the basic electronic experimental class presentation and students' independent experiments and has brought about a innovaton model of interactive practice in the teaching of electronic technology courses.
A design of LED full color display screen control system based on FPGA

Wu Xu-zhi

Abstract:This system designs a new architecture for LED full color scanning controller board by using C8051F340 MCU+FPGA module as the main control module to implement point-to-point control and full color screen display.It completes the acquisition of temperature and humidity within the display screen,power supply voltage monitoring,environmental luminosity monitoring outside the screen,the communication with upper computer and the FPGA configuration and control by using the flexibility and versatility of MCU.FPGA,as a high-speed device,is used to deal with data receiving and scanning,and constant current driver chip MBI5036IC is used to achieve LED constant drive.

Computer Science,Engineering
Display and Drawing Methods for LCD Module

Chen Jianqun,Duan Chendong,Dong Penghui,Lu Wei

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2009.04.013

2009-01-01

Abstract:More and more Intelligent instruments take LCD modules as their interface which can display Chinese characters Images and Curve.The paper takes TS12864-3/B as an example to introduce the Chinese characters and Images display method and some notations,studies the way of diplaying Real-time curve on LCD;the method is applied to a laser measurement and control instrument and get good effect.
Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

ZHONG Qiu-hang,WANG Xiao-ping,WEN Chun-ao,ZHAO Wen-yi

DOI: https://doi.org/10.3969/j.issn.1674-6236.2011.02.035

2011-01-01

Abstract:A LED lighting system which can automatically switch and regulate its brightness of lighting according to the light intensity,infrared radiation and temperature was presented.C8051F020 MCU was used as the system controlling core.A silicon photovoltaic cell and an integrated operational amplifier were used to design the light intensity sensor.A pyroelectric module was selected as the infrared wireless sensor,and DS18B20 was used as the temperature sensor.Besides,a LCD was used to display the working information.Experimental results show that the system can automatically shut down when light intensity is above 2 170lx or when temperature is above 82.5 ℃,and switch on when light intensityls below 1 040 lx or when temperature is below 49.3 ℃.When the light intensity is fluctuates from 1 000 lx to 2 000lx,the brightness of the LED lighting system can automatically adjust to maintain the basic stability of the environment illumination.
Dynamic Chinese Character Display Using Microcontroller-Based LED Dot Matrix Billboard

Ke Duan,R. A. Juanatas,Junduo Wang

DOI: https://doi.org/10.1109/RI2C60382.2023.10356037

2023-08-24

Abstract:In this research, the author leverages the advanced capabilities and technologies offered by the STC89C52RC controller to construct an electronic display incorporating multiple polar array modules. The primary focus of this display lies in its dynamic presentation of Chinese characters. The driver section design encompasses key components such as shift memory and registers, which play a crucial role in ensuring precise scanning of each line and column of text. To ensure smooth circuit operation, the inclusion of the 8550 transistors allows for effective current control, thereby amplifying current intensity and enhancing scanning efficiency. The software development process adopts a modular approach, facilitating the seamless implementation of the design concept. The software primarily facilitates data transmission to the display, enabling dynamic adjustment of the displayed text through control signals. Furthermore, specific software aids in character extraction, enabling the electronic display to manifest various dynamic effects, including vertical movement, when presenting static text. Rigorous experimentation validates the successful realization of dynamic text display functionality, with no observed ambiguities or performance fluctuations during the display process.

Engineering,Computer Science
Design of Portable Oscilloscope Based on ATMEGA64 MCU

Jian Li

2014-01-01

Abstract:A design scheme of portable digital oscilloscope based on ATMEGA64 MUC was introduced.The oscilloscope used ATMEGA64MCU of company of ATMEL as main controller and the CPLD chip EPM3064Aas auxiliary controller to control the sample rate.The oscilloscope uses a resolution of 240×320TFT LCD display for reducing its size.In the power supply,compared with the traditional 220VAC power,the oscilloscope used 9to 12VDC power that can reduce the power consumption greatly.The tests showed that the oscilloscope has high reliability,simple structure,low costs,low power consumption and other characteristics,it has good market prospects.
The application of DSP in the display of the big LED screen

王宾

DOI: https://doi.org/10.3969/j.issn.1674-7720.2009.22.016

2009-01-01

Abstract:The control circuit of the big LED screen system is almost made up of one or some CPU with many complicated circuits around.It is complex in MCU programme and with many troubles in debugging the circuit.The reliability and realtime processing is very difficult to be ensured.According to the matter,the author brings up a method which is made up of TMS320LF2407A and EPM240,SD card used to save display file.It will make the data transform and the control of display separate completely.Every part just do as it will do.The system exert the excellence of DSP and CPLD,also make high-powered and no twinkle display to be realized.
Study on Display Design of MEMS-CAD

俞武嘉,李建华,傅建中,陈子辰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2001.05.027

2001-01-01

Abstract:In this paper, the feature of MEMS-CAD is introduced at first. And then, the display design method of MEMS-CAD is discussed in detail. Later, we make a study of how to fulfil the display design of MEMS-CAD System, which based on Windows?platform of PC.
Design and implementation of display module in staring laser detecting and warning system

Li Jianping,Niu Yanxiong,Su Ping,Niu Haisha,Zhang Chao,Li Yinan,Li Daqian

DOI: https://doi.org/10.3969/j.issn.1002-7300.2013.07.023

2013-01-01

Abstract:Staring laser detecting and warning system uses digital signal processor to drive liquid crystal display module for the display.The incompatibility of speed and time sequence between DSP and LCD causes the difficulty of display on LCD.Start laser detecting and warning system based on DSP chip of TMS320DM642 as the core,use the general-purpose input/output peripheral simulating serial time sequence,design the hardware interface of display module,analyze the serial time sequence and display function of the display module,and realize the real-time display of system.Experimental results show that this method can effectively solve the time sequence's non-compatible problem between high speed DSP and low speed LCD;the real-time display of laser wavelength and azimuth is achieved with quick refurbishing and steady performance.
Design of OLED Display Interface and Driver Based on SH1123

DING Wei-cheng,WANG Yi,LI Yuan-jing,WANG Min,FANG Fang

DOI: https://doi.org/10.3969/j.issn.1007-2780.2009.06.024

2009-01-01

Chinese Journal of Liquid Crystals and Displays

Abstract:This paper introduces the graphics dot matrix OLED display module based on the SH1123 drive,and then gives out the hardware interface circuit between the C8051F340 microprocessor and the module.Through a brief analysis of the SH1123 command system,the paper focuses on the realization of the underlying drivers of the module in the C language programming environment.It provides the realization of using keys to control the display menu.The OLED has good display effect and low power.So it is very suitable to the application which human-computer interaction interface shall has good display effect and low power requirements.
The Design Of Electronic Billboard Based On TMS320F2812

Jiang Hong-fen

Abstract:Electronic billboard are put into applications widely in real life. This paper describes the electronic signs which show the basic principles of the hardware and software design methods, The results are provided through the software CCS (Code Composer Studio 2.21) combining ICETEK 5100USB simulator and ICETEK F2812-A simulation, Finally, the paper prescribes electronic billboard experimental results map in F2812 evaluation.

Computer Science,Engineering
Research and Design of Data Processor for Helmet LcoS Microdisplay System

黄茜,耿卫东,商广辉,代永平,姜晓鹏,费旭峰

DOI: https://doi.org/10.3969/j.issn.1007-2780.2008.03.006

2008-01-01

Chinese Journal of Liquid Crystals and Displays

Abstract:This paper systemically analyses the requisites of helmet LCoS FSC microdisplay system such as data format, transmission rate and power dissipation. A single ZBT SRAM is used in the data processor. 40.5 MHz data rate is obtained, taking full advantage of the ZBT SRAM having no dead cycles between write and read cycles, which is much higher than required in a RGB32 FSC display system at the main data clock of 13.5 MHz. Using this system we obtain 0.6 W reduction in power dissipation and approximate 40 cm2 decrease in area. The hardware, a circuit including FPGA,ZBT SRAM and LCoS microdisplay, realize the field sequential color display at VGA resolution of 640×480 at 150 Hz field refresh rate.
Mcu-based Electronic Organ System with Record/playback Function

Li Lintao,Chen Ming,Liang Yiyong,Wang Xiaoping

DOI: https://doi.org/10.19695/j.cnki.cn12-1369.2010.02.008

2010-01-01

Abstract:This paper introduces a multi-functional electronic organ system based on MCS-51 MCU, which has the function of playback, record and play. In the system, two octaves can be inputted using a 8×2 matrix keyboard. And the name of music which is playing or recording can be displayed on the LED nixie tube. Besides, the volume and tone of music score can also be displayed by the creative use of LED array. By the combined use of multiple functions mentioned above, the system can be used as an auxiliary tool in electronic organ learning, as well as a reference example of MCU synthetical application in MCU learning.
Driving Circuits of 128× 64 Matrix OLED

董桂芳,邱勇

DOI: https://doi.org/10.3969/j.issn.1006-6268.2002.03.008

2002-01-01

Abstract:A kind of driving circuits for organi c light emitt in g diode displays is designed.It is suitable for128×64matrix display panel .64-lev el gray-scale can be realized by puls e-width-modulation in this cir-cuits.The output constant currents can be programmed by DAC(digital to an alog conversion)methods.The ratio of the scanning circuit is 1/64.
Design of Electronic Billboard Based on AT89S51

Li Tao

Abstract:In order to deal with the problems of high price and large power consumption of neon light,a lattice screen 16×16 which display monochrome connected with the four 8×8 lattice screens is proposed.Using the serial input and parallel output of 74LS164 to expand port,AT89S51 as control chip,p0/p2 port as control row,74LS164′s input is p3 port,and two 74LS164 are connected to control col,then programming to display characters by calling difference codes.This lattice screen has significance meaning in environmental protection and energy saving.

Materials Science,Engineering
The Application of C51 in the LCD Display

汤涛,孙志锋

DOI: https://doi.org/10.3969/j.issn.1001-4551.2002.05.012

2002-01-01

Abstract:The paper introduces the LCD controller-HD61202U of Hitachi corporation. And taking the LCM12864 of OCCULAR corporation in xiamen as an example, MCU AT89c51 is used as main controller chip to program the LCD display codes using c51.
Design and Implementation of an Intelligent Ultrasonic System based on 51 Microcontroller

Xiaolei Zhong,Rui Qiao

DOI: https://doi.org/10.62051/ijepes.v2n2.06

2024-06-26

Abstract:With the rapid development of microelectronics and intelligent technology, microcontroller units (MCUs) are increasingly applied in various fields. This paper proposes the design and implementation of an intelligent ultrasonic system based on a 51 microcontroller, integrating ultrasonic sensors, an LCD display, and a 51 MCU to achieve real-time distance measurement, data display, and intelligent control functions. The system utilizes a CD4069 ultrasonic sensor to transmit and receive ultrasonic waves, measuring the distance between the sensor and an object by calculating the time difference between transmission and reception. The measured distance data is processed and displayed on an LCD screen in real-time. Furthermore, the system features intelligent control capabilities, automatically adjusting and controlling devices based on the measured data, thereby enhancing the system's level of intelligence. The intelligent ultrasonic system based on the 51 microcontroller offers advantages such as low cost, high precision, and strong versatility. It can be widely used in various fields, including intelligent robots, obstacle avoidance systems, and automatic parking systems. The design and implementation of this system not only demonstrate innovative applications of ultrasonic ranging technology but also provide valuable references for the extensive application of microcontroller units in intelligent technology fields.
Design and Simulation of Dynamic Display LED Based on Single-chip Microcontroller

E. De-hai

Abstract:For today's widely used in LED display technology,a king of low-cost and small LED dynamic display module based AT89S51 microcontroller core was designed,designed to clear thinking,simple and workable solution.System hardware design,software design and system ultimately the FBI were completed,a dynamic digital LED display design and simulation was achieved,and simulation results meet the system requirements.

Engineering,Computer Science

Research of wave display system based on 12864 LCD

Design of VGA displaying and Laser printing System Based on C8051F

Passively Addressed FLC Display Possessing an Inherent Gray Scale and Memory

Design of multi-functional portable electronic experimental box based on Labview and ARM

A design of LED full color display screen control system based on FPGA

Display and Drawing Methods for LCD Module

Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

Dynamic Chinese Character Display Using Microcontroller-Based LED Dot Matrix Billboard

Design of Portable Oscilloscope Based on ATMEGA64 MCU

The application of DSP in the display of the big LED screen

Study on Display Design of MEMS-CAD

Design and implementation of display module in staring laser detecting and warning system

Design of OLED Display Interface and Driver Based on SH1123

The Design Of Electronic Billboard Based On TMS320F2812

Research and Design of Data Processor for Helmet LcoS Microdisplay System

Mcu-based Electronic Organ System with Record/playback Function

Driving Circuits of 128× 64 Matrix OLED

Design of Electronic Billboard Based on AT89S51

The Application of C51 in the LCD Display

Design and Implementation of an Intelligent Ultrasonic System based on 51 Microcontroller

Design and Simulation of Dynamic Display LED Based on Single-chip Microcontroller