Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

Indoor Lighting System Based on Intelligent Detecting Technology

Research on illumination measurement system by segmented calibration based on MCU

Study of Energy Efficient with Intelligent Traffic and Illuminating Control System

Design of Intelligent HB LED Illumination System Based on MCU Controller

Multi-function Lighting Control System for Classroom Based on Sunplus MCU

The Design of A Self-Adaptive Illuminance and Color Temperature Adjustable LED Desk Lamp

Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

Design and Research of Indoor Lighting Control System Based on the STM32

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

Design of an Intelligent Temperature Control System for High-power LED Lighting

Classroom Energy-saving Control System Design

A Design of Led Light System Used For Greenhouse Plants Based on MCU

Automatic Vehicle Headlight Intensity Control

LED Projection Light Brightness Uniformity Detection System Design

Energy Efficient Street Lighting System Based on Microcontroller

An Intelligent Controller of LED Street Light Based on Discrete Devices

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

Design of Intelligent Lighting System for Warehouse

Intelligent Controller for Photovoltaic Lighting Systems

Design of Light Emitting Diodes (LEDs) Lighting System and Its Application in Garden Landscape Decoration