Abstract:This paper introduces a new type of flexible rudder surface based on the cosine-type zero Poisson's ratio honeycomb to enhance the adaptive capabilities of aircraft and enable multi-condition, rudderless flight. The zero Poisson's ratio honeycomb structure exhibits exceptional in-plane and out-of-plane deformation capacities, as well as a high load-bearing capability. To investigate the deformation characteristics of flexible rudder surfaces utilizing cosine honeycomb structures, this study undertakes a comprehensive investigation through finite element simulation and 3D printing experiments. Moreover, this study analyzed the impact of honeycomb parameters and layout on the deflection performance and weight. The flexible rudder surface, fabricated from nylon, achieves smooth and consistent chordwise bending deformation, as well as uniform spanwise deformation within a tolerance of ±25°, and the maximum equivalent stress observed was 31.99 MPa, which is within the material's allowable stress limits (50 MPa). Finite element simulation results indicate that once the deflection angle of the rocker exceeds 15°, a discernible deviation arises between the actual deflection angle of the flexible control surface and that of the rocker. Furthermore, this deviation escalates with increasing rocker rotation angles, and this discrepancy can be mitigated by augmenting the number of cosine honeycomb cells within the flexible rudder surface. Finally, a prototype of the flexible rudder surface was successfully produced using 3D printing technology, and the experimental results confirmed the deformation behavior, aligning with simulation outcomes with a deviation of less than 20%. These findings confirm the effective deflection performance of the designed flexible rudder surface, highlighting its potential application in small unmanned aerial vehicles.

In-plane Corrugated Cosine Honeycomb for 1D Morphing Skin and Its Application on Variable Camber Wing

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Mechanical properties and band gap characteristics of flexible skin based on multi-concave angle honeycomb

Research on Large-Deformation Trapezoidal Skin Structure of Morphing Wings

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

On the Vein-Stiffening Membrane Structure of a Dragonfly Hind Wing

A novel design of an actively deformable honeycomb structure with application to a variable thickness leading-edge wing

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

Design and Shear Analysis of an Angled Morphing Wing Skin Module

Investigation on the mechanical properties of topologically optimized cellular structures for sandwiched morphing skins

Conceptual Design of Compliant Structures for Morphing Wingtips Using Single-Row Corrugated Panels

Aeroelastic model and analysis of an active camber morphing wing

Innovative Skin Structures: Synthesis, Void Analysis, and Hysteresis Modeling of Zero Poisson's Ratio Skin for Span Morphing Wing

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Structural Analysis and Testing of a Flexible Rudder Using a Cosine Honeycomb Structure

A variable camber wing concept based on corrugated flexible composite skin

In-plane elasticity of a novel arcwall-based double-arrowed auxetic honeycomb design: Energy-based theoretical analysis and simulation

Design of Compliant Mechanism-Based Variable Camber Morphing Wing with Nonlinear Large Deformation

A novel cellular structure with center-symmetric cell walls for morphing applications

A multi-scale damage model and mechanical behavior for novel light-weight C/C honeycomb sandwich structure