Abstract:Cellular materials exhibit two key properties: structures and mechanisms. This allows for the design of structures using cellular materials while effectively controlling both stiffness and flexibility, based on the connectivity of the struts. This study aims to explore the in-plane flexible properties of cellular materials dominated by bending under macroscopic deformation. Additionally, it seeks to establish a method for designing a passive morphing airfoil with flexible cellular cores. The investigation focuses on airfoils featuring re-entrant and S-shaped cellular cores, analyzing their behavior under static loads by examining the deformation of the cellular cores subjected to aerostatic loads. In the context of the airfoil's deformation with flexible cellular cores under aerostatic loading, shear emerges as the predominant deformation mode for the cores of the airfoil. Wings of conventional aircraft are optimized for only a few conditions, not for the entire flight envelope. Therefore, it is necessary to develop the morphing airfoil with smart structures for the next generation of excellent aircraft. In this project, this was made possible using, re-entrant and S-shaped auxetic structures as a member of the meta- material family, with negative Poisson's ratio to enable an effortless passive morphing mechanism as it has high flexibility along in-plane direction (chord-wise). The 3D CAD Models of Re-entrant and S-shaped auxetic airframes were designed and analyzed. Initially, Static Structural analysis is performed on both airframes to observe the structure’s behavior, and design modification and optimization are performed in different iterations. With a reduction in maximum equivalent stress by 20%, the Re-entrant airframe exhibits lower stress and hence more flexibility. The wings were modeled with a span of 1m using auxetic airframes, air pressure was generated using CFD analysis with MACH 0.45. Finally, the fluid-structure interaction was done by importing the air pressure and performing static structural analysis for the structural performance of wings using auxetic airframes. It was found that Re-entrant auxetic wing showed an increase of 9.99% in load carrying capacity, accompanied by a decrease of 389 grams of weight when compared to S-shaped auxetic wing. Considering the deformation of the airframe with flexible cellular cores under a load, the re-entrant honeycomb core shows the highest flexibility in shear and causes lower stress than the S-auxetic cores. This implies that the re-entrant honeycomb core has the potential for passive morphing.

A novel design of an actively deformable honeycomb structure with application to a variable thickness leading-edge wing

A Kirigami Shape Memory Polymer Honeycomb Concept for Deployment

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

Design of Compliant Mechanism-Based Variable Camber Morphing Wing with Nonlinear Large Deformation

Design Of Morphing Wing Leading Edge With Compliant Mechanism

Mechanical properties and band gap characteristics of flexible skin based on multi-concave angle honeycomb

A novel integrated forming strategy based on chemical vapor infiltration for C/C honeycomb with variable stiffness

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

In-plane Corrugated Cosine Honeycomb for 1D Morphing Skin and Its Application on Variable Camber Wing

Design of a variable-sweep wing structure with flexible shear skin

Graded metastructure design for linearly auxetic deformation under tension: From 2D honeycombs to 3D truncated cones

A New X-Actuator Design for Controlling Wing Bending and Twisting Modes

Active compound shape/vibration control of piezo-actuated variable camber wing section via hybrid feedback/feedforward control scheme

Conceptual Design of Compliant Structures for Morphing Wingtips Using Single-Row Corrugated Panels

Research on shape memory alloy honeycomb structures fabricated by selective laser melting additive manufacturing

Graded negative Poisson’s ratio honeycomb structure design and application

Autonomous Material Composite Morphing Wing

Customized deformation behavior of morphing wing through reversibly assembled multi-stable metamaterials

Aircraft Wing Morphing Using Auxetic Structures

In-plane elasticity of a novel arcwall-based double-arrowed auxetic honeycomb design: Energy-based theoretical analysis and simulation

Design and Validation of the Trailing Edge of a Variable Camber Wing Based on a Two-Dimensional Airfoil