Abstract:This paper introduces a new type of flexible rudder surface based on the cosine-type zero Poisson's ratio honeycomb to enhance the adaptive capabilities of aircraft and enable multi-condition, rudderless flight. The zero Poisson's ratio honeycomb structure exhibits exceptional in-plane and out-of-plane deformation capacities, as well as a high load-bearing capability. To investigate the deformation characteristics of flexible rudder surfaces utilizing cosine honeycomb structures, this study undertakes a comprehensive investigation through finite element simulation and 3D printing experiments. Moreover, this study analyzed the impact of honeycomb parameters and layout on the deflection performance and weight. The flexible rudder surface, fabricated from nylon, achieves smooth and consistent chordwise bending deformation, as well as uniform spanwise deformation within a tolerance of ±25°, and the maximum equivalent stress observed was 31.99 MPa, which is within the material's allowable stress limits (50 MPa). Finite element simulation results indicate that once the deflection angle of the rocker exceeds 15°, a discernible deviation arises between the actual deflection angle of the flexible control surface and that of the rocker. Furthermore, this deviation escalates with increasing rocker rotation angles, and this discrepancy can be mitigated by augmenting the number of cosine honeycomb cells within the flexible rudder surface. Finally, a prototype of the flexible rudder surface was successfully produced using 3D printing technology, and the experimental results confirmed the deformation behavior, aligning with simulation outcomes with a deviation of less than 20%. These findings confirm the effective deflection performance of the designed flexible rudder surface, highlighting its potential application in small unmanned aerial vehicles.

Mechanical properties and band gap characteristics of flexible skin based on multi-concave angle honeycomb

Design and analysis of flexible skin based on zero Poisson's ratio hybrid honeycomb

In-plane Corrugated Cosine Honeycomb for 1D Morphing Skin and Its Application on Variable Camber Wing

Structural-acoustic coupling characteristics of honeycomb sandwich plate based on parameter sensitivity analysis

A novel design of an actively deformable honeycomb structure with application to a variable thickness leading-edge wing

Structural Analysis and Testing of a Flexible Rudder Using a Cosine Honeycomb Structure

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

Energy absorption performance of honeycombs with curved cell walls under quasi-static compression

An approach of wrinkle suppression to corrugated-core flexible skin under bending

Multi-objective optimization design of a new non-uniform rectangular honeycomb sandwich panel

Fabrication and mechanical properties of CFRP honeycomb cylinder based on the transforming from the flat honeycombs

Elastic properties of honeycombs with spline curve cell walls

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

Reliable comparison of multi-directional mechanical properties for biomimetic circle arc honeycombs

Advanced honeycomb designs for improving mechanical properties: A review

In-plane elasticity of a novel arcwall-based double-arrowed auxetic honeycomb design: Energy-based theoretical analysis and simulation

Mechanical performance study of high flexibility arrow-shaped concave arc bottoms negative Poisson's ratio honeycomb structure

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Nonlinear performance analysis and rapid prediction of out-of-plane deformation in graded honeycombs

Dynamic Response and Energy Absorption Characteristics of a Three-Dimensional Re-Entrant Honeycomb

Graded negative Poisson’s ratio honeycomb structure design and application