Abstract:This work analyses circuit phase delay for carrier-modulation MEMS capacitive gyroscopes. The temperature-dependent circuit phase delay is a major source of gyroscope output drift, which deteriorates the gyroscope bias instability (BI) and angle random walk (ARW). Effects of both drive-mode and sense-mode circuit phase delay on gyroscope performance when using different signal extraction architectures are analyzed in detail. The online suppression method which combines the so-called modified double sideband (MDSB) extraction architecture in the gyroscope drive mode and closed-loop force-rebalance loop in the sense mode can eliminate the impact of residual fluctuation error of circuit phase delay in real time. When drive-mode circuit phase delay equivalently varies from -20 degrees to 20 degrees, using MDSB decreases the fluctuation of the open-loop zero-rate output (ZRO) by 70% compared to using double sideband (DSB) and by 99.7% with respect to using single sideband (SSB). Meanwhile, improvement for the closed-loop ZRO using MDSB is 92.48% and 94% compared to cases using DSB and SSB, respectively. Furthermore, when the equivalent circuit phase delay of the sense-mode alters from -20 degrees to 20 degrees, ZRO variation for the gyroscope with force rebalanced sense loop and quadrature stiffness nulling loop decreases by 80% in contrast to the case with open loop, which demonstrates the effectiveness of online suppression for circuit phase delay of both the drive-mode and sense-mode. Using the online suppression method, the gyroscope has achieved a BI of 0.16 degrees h(-1) and ARW of 0.011 degrees (root h)(-1). Furthermore, using the MDSB in the drive mode obtains the best stability compared to using the DSB and SSB as the temperature changes.

Analysis of In-Phase Coupling Error in the Vibratory MEMS Gyroscope with Various Vacuum Degrees

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

One-time Frequency Sweep to Eliminate IQ Coupling in MEMS Vibratory Gyroscopes

In-Phase Coupling Forces Induced by Air Flow and Drive Force in Split-Mode Silicon Micromachined Linear Vibratory Gyroscopes

Effects of Combs on Coupling Error in the Vibratory MEMS Gyroscope with Various Air Dampings

Effects Of Both The Drive- And Sense-Mode Circuit Phase Delay On Mems Gyroscope Performance And Real-Time Suppression Of The Residual Fluctuation Phase Error

An Improved Phase-Robust Configuration for Vibration Amplitude-Phase Extraction for Capacitive MEMS Gyroscopes

Effects of Structural Dimension Variation on the Vibration of MEMS Ring-Based Gyroscopes

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Identification of the Coupling Forces Ratio in Silicon Vibratory MEMS Gyroscopes

Performance Improvement for MEMS Gyroscopes by Suppressing the Circuit Phase Delay

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Analysis on Digital Automatic Gain Control of MEMS Gyro Driven-Loop Circuit

Study on the Influence Induced by Electrical Coupling among Interconnection Lines in MEMS Gyroscopes

Separation and identification for structure error parameter in vibratory silicon MEMS gyroscopes

Analysis of the Mechanical Coupling Characteristics of a Monolithic Tri-Axis MEMS Gyroscope

Mechanism Analysis and System Identification of the Quadrature Error in MEMS Gyroscope

Structure-air Damping Coupling Analysis of Micromachined Gyroscope

Gas Damping Coefficient Research for MEMS Comb Linear Vibration Gyroscope

Test and Analysis of the Optical Kerr-Effect in Resonant Micro-Optic Gyros