Abstract:In this paper, a novel nanoporous barium titanate (BaTiO3) crystalline powder was synthesized by using triblock poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) based systems (P-123) as the soft template via a sol-gel method and their structure-dependent electro rheological property was studied. The pore diameter and specific surface area of BaTiO3 were precisely controlled by varing the calcined temperature. The chemical composition, structure and surface morphology of BaTiO3 were characterized by X-ray diffraction (XRD), thermo gravimetric analysis (TGA), and nitrogen adsorption-desorption method, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The result revealed that the pore volume and specific surface area of BaTiO3 decreased with the increment of calcined temperature. The electro rheological fluids (ERFs) were obtained by dispersing BaTiO3 crystallites in silicon oil and three kinds ERFs were fabricated by using three kinds of BaTiO3 which were prepared under different calcined temperature (550, 600 and 900 A degrees C) as the precursors. The behaviors of the ERFs were evaluated via a rotational rheometer fixed with electric field generator. The results showed that electro rheological effect was related to the pore volume and specific surface area of BaTiO3. Due to the distinct advantage of sol-gel method for preparing nanoporous BaTiO3 without contamination of the materials, the markedly low current destiny of the ERFs was obtained. The yield stress of ERFs with large specific surface area of BaTiO3 reached the maximum of 3 kPa, which is higher than that of ERFs using traditional pure BaTiO3 crystallites (lower than 1 kPa).

In Situ Synthesis of Field-responsive Nanocrystalline BaTiO 3 Particles Modified with Functional Organics

Novel Electro-Rheological Nanocrystalline Dielectric Particles Modified with or Embedded in Organics

In situ synthesis of nanocrystalline BaTiO<sub>3</sub> particle–polymer hybrid

In situ synthesis of nanocrystalline BaTiO 3 particle–polymer hybrid

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Synthesis of PbTiO3/organic Hybrid from Metalorganic Compounds

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Structure and Electrorheological Properties of Nanoporous BaTiO3 Crystalline Powders Prepared by Sol–gel Method

New Nonhydrolytic Route to Synthesize Crystalline BaTiO3 Nanocrystals with Surface Capping Ligands

Preparation of Single-Crystalline BaTi5O11 Nanocrystals by Hydrothermal Method

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Preparation of Monodisperse Nanocrystalline Barium Titanate

Synthesis and Characterization of TiO_2 Nano-crystalline with Different Morphologies by Low-temperature Hydrothermal Method

Titanium Dioxide Nanoparticles Modified with Disulfonic Acid Functionalized Imidazolium Ionic Liquids for Use As Electrorheological Materials

Preparation and Characterization of Organic Nano-Titanium Dioxide/Acrylate Composite Emulsions by In-Situ Emulsion Polymerization

Morphological Control of Ba-Ti-O Particles Prepared by Molten Salt Synthesis

Sol–gel based synthesis of ultrafine tetragonal BaTiO 3

Experimental and Simulation-Based Understanding of Morphology Controlled Barium Titanate Nanoparticles under Co-Adsorption of Surfactants