Abstract:Crystal growth of barium titanate (BaTiO3) using a wet chemical reaction was investigated at various temperatures. BaTiO3 nanoparticles were obtained at an energy-efficient temperature of 80 °C. However, BaTiO3 nanocubes with a preferred size and shape could be synthesized using a solvothermal method at 200 °C via a reaction involving titanium tetraisopropoxide [(CH3)2CHO]4Ti for nucleation and fine titanium oxide (TiO2) nanoparticles for crystal growth. The BaTiO3 nanocubes showed a high degree of dispersion without the use of dispersants or surfactants. The morphology of BaTiO3 was found to depend on the reaction medium. The size of the BaTiO3 particles obtained using water as the reaction medium was the largest among the particles synthesized using various reaction media. In the case of alcohol reaction media, the BaTiO3 particle size increased in the order methanol, ethanol, 1-propanol, 1-butanol, and 1-pentanol. Furthermore, BaTiO3 powder obtained using alcohol reaction media resulted in cubic shapes as opposed to the round shapes obtained when water was used as the medium. We found that the optimal condition for the synthesis of BaTiO3 nanocubes involved the use of 1-butanol as the reaction medium, resulting in an average particle size of 52 nm, which is the average distance of the cubes measured diagonally from corner to corner, and gives an average side length of 37 nm, and a tetragonal crystal system as evidenced by the powder X-ray diffraction pattern obtained using high-energy synchrotron X-rays. The origin of the spontaneous polarization of the BaTiO3 tetragonal crystal structure was clarified by a pair distribution function analysis. In addition, surface reconstruction of BaTiO3 nanocubes led to an outermost surface comprising two layers of Ti columns.

Preparation of Monodisperse Nanocrystalline Barium Titanate

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Preparation and Characterization of Monodispersed BaTiO3 Nanocrystals Using One-Step Solvothermal Method

Synthesis of monodispersed barium titanate nanoparticles with narrow size distribution by a modified alkoxide-hydroxide sol-precipitation method

Preparation of Single-Crystalline BaTi5O11 Nanocrystals by Hydrothermal Method

Further Study of Preparation of Nanosized BaTiO_3 by Way of Coprecipitation

Low-temperature synthesis of barium titanate thin films by nanoparticles electrophoretic deposition

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Experimental and Simulation-Based Understanding of Morphology Controlled Barium Titanate Nanoparticles under Co-Adsorption of Surfactants

Morphology and atomic-scale surface structure of barium titanate nanocrystals formed at hydrothermal conditions

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

Fabrication of Monodispersed 5‐nm BaTiO3 Nanocrystals with Narrow Size Distribution Via One‐Step Solvothermal Route

Barium Titanate Tetragonal Prism Arrays: Preparation and Characterization

Size-controlled synthesis of BaTiO3 nanocrystals via a hydrothermal route

Oleic acid assisted glycothermal synthesis of cuboidal Ba(0.6)Sr(0.4)TiO3 nanocrystals and their ordered architectures via self-assembly

Stabilization of Size-Controlled BaTiO3 Nanocubes via Precise Solvothermal Crystal Growth and Their Anomalous Surface Compositional Reconstruction

Effect of NaOH Concentration on Formation of Ba4Ti13O30 and BaTi5O11 Nanocrystals Prepared by Hydrothermal Method

Monodisperse Hollow Perovskite BaTiO3 Nanostructures Prepared by a Sol–gel–hydrothermal Method

Microstructural Characterization of BaTiO3 Ceramic Nanoparticles Synthesized by the Hydrothermal Technique