The Panel Controls a Design Technique in the VB.NET

张艳平,王香玲,陈震

DOI: https://doi.org/10.3969/j.issn.1006-4052.2010.08.017

2010-01-01

Abstract:This text mainly introduces menu of use the VB.NET realization similar VB.NET inside toolbox,and additional code.

What problem does this paper attempt to address?

A New Method of Designing Menu of Single-chip System

LI Mintong,ZHANG Zhanguo

DOI: https://doi.org/10.3969/j.issn.1000-3428.2006.16.099

2006-01-01

Abstract:This paper presents a new method of designing the menu of the tree-like topological structure with linear array of one dimension.This method has high efficiency in using the memory,and has a simple and clear logic relation.In addition,the setting-up and modification of the menu is very convenient.The new method is suitable for the application system of the single-chip computer.
The Experience of Second Developing AutoCAD and Illustration of Some Practical Programs

蔡晋辉,周泽魁,庞学新

DOI: https://doi.org/10.3969/j.issn.1001-3695.2001.09.027

2001-01-01

Abstract:Use the secondary development ways of AutoCAD,such as AutoLisp,menu developing technique and so on,to develop the AutoCAD with your professional requirement Then In order to express the practicality and technique of the secondary development of AutoCAD,some practical programs is given to show
Drawing and Application of GOO Single-Line Display of Distribution Network

Jiangang Lu

2009-01-01

Abstract:The drawing and application of GOO(Graphic-Object-Oriented) single-line display for power distribution network are realized using GDI+ technology and the class and interface method in Windows environment.Four levels of class are designed with the concept of layered modularization:the base class,management of public properties and methods;the basic graph class,point,line,rectangle and text derived from the base class;the merging / binding class,various electric icons created from the basic graph class;the canvas class,management of icon aggregation on a single-line display.The display is saved on disk through serialization / deserialization and uploaded to database server.The client detects the new version and updates the display by downloading from server.An enumeration structure and a global control word collection are defined to meet different requirements of different applications for icon generation,single line drawing,topology modeling,switch operation simulation,etc..
Design and Implementation of Aided User Management System for Windows NT

陈华鹏,陈根才,沈音乐

DOI: https://doi.org/10.3969/j.issn.1000-3428.2001.06.075

2001-01-01

Abstract:To ensure the data security and correctness and increase the work efficiency, this paper introduces a method to extend the domain-user management of NT operating system by the B/S+API technology, and gives a successful example.
A Singlechip System Menu Management Realized with C51

黄声野,陈秀华,王东生

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.03.075

2004-01-01

Abstract:The paper introduces a universal and practical method for menus manage . By using Pointer and structure of C51 langue, this novel menu management successfully separates the menu program from the main program, and makes the submenus independent from each other. Details and examples, as well as menu modify method are provided.
The Study of Title Bar and Part List Autogeneration Technique Based on UG

李发根,李国禄,李海鹏,邱建新,丁雷

DOI: https://doi.org/10.3969/j.issn.1674-6457.2004.01.009

2004-01-01

Abstract:The basic concept and characteristics of UG/Open API are introduced, some important techniques and methods about the autogeneration of title bar and part list are studied. The codes are programmed with VC~(++6.0,and the insufficiency of UG is remedied.
Development of Trend OCX Based on Visual Basic

区志励,蔡晋辉,张光新

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.05.014

2006-01-01

Abstract:For the complexity of Trend component in industry control software,this paper presents a trend OCX based on Visual Basic which realized powerable function,has good universalness,extendibility,real time capability,easy to use and can be mebedded into the software.
Design of Simulation Software for Experiments with Visual Basic

杨欢,唐益民

DOI: https://doi.org/10.3969/j.issn.1008-0686.2002.04.033

2002-01-01

Abstract:Because of the shortage of lab hours, poor expandable capabilities of equipments and poor qualities of experiment teaching. The authors take advantage of the features of visual basic, suggests using VB to develop a simulation software for expriments. In this paper the author takes electrical machine expriment for example, describes the methods for the realization and application of this kind of software.
Software design of numerical control system based on thread technique

王洪刚,傅建中

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.01.022

2004-01-01

Abstract:The characteristics of numerical control system are described in this paper,which introduces a numerical control system based on thread technique of PC,at the same times, analyzes the data structure of data disposed in the numer ical control machining and presents the algorithm. This system has been applied in the numerical lathe control system.
THE IMPLEMENTATION OF A DYNAMIC WEB-MENU SYSTEM WITH ACCESS CONTROL BASED ON ASP.NET

She Jiangfeng,Feng Xuezhi

DOI: https://doi.org/10.3969/j.issn.1000-386X.2006.10.021

2006-01-01

Abstract:This paper introduces a solution to construct the dynamic multi-level web-menu system based on the ASP.NET platform,which can be presented with the similar style of the traditional windows menu system on web pages.The web-menu system is implemented inside a specially designed base-class of the web pages,and then can be integrated into all the derived pages seamlessly without forcing influence on the design and development of the derived web pages.The access to the menu item or to the web-page is controlled by the base-class of the web-page in terms of the user rights.
Development of Modularized Design Software for Combination Tubes of Pressure Pipes

XIE Tao,JIN Zhijiang,CAO Ming

DOI: https://doi.org/10.3969/j.issn.0254-6094.2006.02.009

2006-01-01

Abstract:The second development process of the special AutoCAD software for the combination tubes of pressure pipes with VB6.0 as development environment was described using the nozzles provided by ActiveX Automation,the design process and key procedures of the software were presented,partial program codes and examples were given,their application result was good.
A Method of Interactive Interface for Embedded ControIIer

吴波,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2014.06.013

2014-01-01

Abstract:This paper proposes a generaI framework design for LCD muIti-IeveI menu,aiming at the design for interactive interface of controI er based on ARM.Then this paper puts forward a method for efficient keystrokes and interactive input,which can avoid traditionaI keys' jitter as weI as improve the utiIizationof I/O portby appIying touch keys,and take advantage of the structure variabIe in the C Ianguage to set the parameters.Themethod has got practicaI appIicationin the design of the ten-sion controI er system.
The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

余昌盛,许力

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.07.005

2004-01-01

Abstract:COM is the one of the most important peripheral interfaces in computer; therefore it is significant to do the study of programming design methods in serial communication. In this paper we discuss the four programming design methods of serial communication on C~(++) Builder 6 platform: direct embedded assembler, Windows API functions, MSComm component based on the technique of ActiveX and Third-Party component SPComm. We also give the compared results of the four programming design methods in serial communication, and provide programming examples.
The Construct and Implementation of Complex Document/View System Based on .NET Framework

ZHANG Xi,ZHANG Shu-yi

DOI: https://doi.org/10.3321/j.issn:1002-8331.2006.25.027

2006-01-01

Abstract:Among the design of applications' user interface,there is usually a demand that more than two views display on the screen at the same time.Sometimes models of a combined system have many common methods that only need one existence,as well as separated menu,data and other resources.In the two cases,the Document/View system could provide with more effective functions and friendly user interface.This paper presents a method of the construct of the Document/View applications,mainly refer to the complex Document/View system based on .NET Framework.
A Kind of Maintenance Method Facing to Portable Product

JIA Lian-qin,GENG Wei-dong,WANG Ying,LI Ya-jing,LIU Yan-yan

DOI: https://doi.org/10.3969/j.issn.1005-488x.2005.04.012

2005-01-01

Abstract:We have put forward a kind of maintenance design method facing to system,and we have also carried out detailed exposition with mobile telephone as an example.We have developed a practical maintenance interface of mobile telephone platform using VC~(++) language,which calls the corresponding conversion tools to complete the picture or ring data transformation,and realize the replacement of the picture or ring by calling the search and replacement sub function,and eventually realize the individuation of the ring and picture.We have emphatically discussed the thinking of designing and the design of maintenance interface,the overall program flow diagram is also given in this article.
Draw and Analyze Quality Control Chart with VC

孙景慧,林亨

DOI: https://doi.org/10.3969/j.issn.1001-3997.2001.06.005

2001-01-01

Abstract:This paper introduces how to draw and analyze quality control chart with Microsoft Visual C + + 6. 0 based on Windows OS. It can monitor the quality variation and provide correct judgement.
User Menu Customization Technology of ANSYS Based on UIDL

程铭,吴志军,冯平法

DOI: https://doi.org/10.3969/j.issn.1000-4998.2006.10.012

2006-01-01

Abstract:在ANSYS 8．0环境下,阐述了基于UIDL的ANSYS二次开发技术。主要介绍了用户定制ANSYS主菜单和对话框的步骤和方法,并以工程实例进行了说明。结果表明,这种方法可以使分析操作更加简便,从而能够提高工作效率。
Development of a New Column Design Software Using Visual Basic

Peng Jianjun,Duan Zhanting,Zhou Rongqi

1996-01-01

Abstract:A new column design software, TCD, was developed using visual basic for windows. The TCD interfaces are very friendly to facilitate communication between the user and the computer. TCD can be used not only to design new columns, but also to check old columns for retray application. TCD can be easily learned and mastered. Several design examples are using TCD to display the advantages of TCD. This ...
Design and Realization of Control Panel of CNC System Based on IPC/RT LINUX

Qiong LI,Xueling WANG,Bizhong XIA

DOI: https://doi.org/10.3969/j.issn.1672-0318.2008.03.004

2008-01-01

Abstract:After an introduction to the hardware and software of a CNC system based on IPC/RT LINUX,a solution to designing and setting up the control panel of CNC system is presented,which can not only satisfy the function demands but also save I/O resources as well as featuring fine-looking appearance and high cost performance ratio.
Design and implementation of dynamic menu based on role-based access control

Ying Chen,Fengyu Yang

DOI: https://doi.org/10.4028/www.scientific.net/AMR.753-755.2990

2013-01-01

Advanced Materials Research

Abstract:Every application systems must provide different menus for different users and its corresponding operation authorities of different roles. While static menus, hidden menus and disabled menus lack flexibility, dynamic menus can overcome this shortcoming. In this paper, based on the theory of role-based access control, we propose the Mechanism of different roles have different authority and dynamically generate corresponding dynamic menus. What's more, we instantiate corresponding basic data table and relational data table, introduce the key techniques of using C# to implement dynamic menus and develop corresponding system. This system can timely generate dynamic menus according to the changes of relationship tables and entities, which make the system, have good usability and scalability.

The Panel Controls a Design Technique in the VB.NET

A New Method of Designing Menu of Single-chip System

The Experience of Second Developing AutoCAD and Illustration of Some Practical Programs

Drawing and Application of GOO Single-Line Display of Distribution Network

Design and Implementation of Aided User Management System for Windows NT

A Singlechip System Menu Management Realized with C51

The Study of Title Bar and Part List Autogeneration Technique Based on UG

Development of Trend OCX Based on Visual Basic

Design of Simulation Software for Experiments with Visual Basic

Software design of numerical control system based on thread technique

THE IMPLEMENTATION OF A DYNAMIC WEB-MENU SYSTEM WITH ACCESS CONTROL BASED ON ASP.NET

Development of Modularized Design Software for Combination Tubes of Pressure Pipes

A Method of Interactive Interface for Embedded ControIIer

The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

The Construct and Implementation of Complex Document/View System Based on .NET Framework

A Kind of Maintenance Method Facing to Portable Product

Draw and Analyze Quality Control Chart with VC

User Menu Customization Technology of ANSYS Based on UIDL

Development of a New Column Design Software Using Visual Basic

Design and Realization of Control Panel of CNC System Based on IPC/RT LINUX

Design and implementation of dynamic menu based on role-based access control