Abstract:Flame atomic absorption spectrometry (FAAS) still keeps its importance despite the relatively low sensitivity; because it is a simple and economical technique for determination of metals. In recent years, atom traps have been developed to increase the sensitivity of FAAS. Although the detection limit of FAAS is only at the level of µg/mL, with the use of atom traps it can reach to ng/mL. Slotted quartz tube (SQT) is one of the atom traps used to improve sensitivity. In atom trapping mode of SQT, analyte is trapped on-line in SQT for few minutes using ordinary sample aspiration, followed by the introduction of a small volume of organic solvent to effect the revolatilization and atomization of analyte species resulting in a transient signal. This system is economical, commercially available and easy to use. In this study, a sensitive analytical method was developed for the determination of lead with the help of SQT atom trapping flame atomization (SQT-AT-FAAS). 574 Fold sensitivity enhancement was obtained at a sample suction rate of 3.9 mL/min for 5.0 min trapping period with respect to FAAS. Organic solvent was selected as 40 µL of methyl isobutyl ketone (MIBK). To obtain a further sensitivity enhancement inner surface of SQT was coated with several transition metals. The best sensitivity enhancement, 1650 fold enhancement, was obtained by the Ta-coated SQT-AT-FAAS. In addition, chemical nature of Pb species trapped on quartz and Ta surface, and the chemical nature of Ta on quartz surface were investigated by X-ray photoelectron spectroscopy (XPS) and Raman Spectroscopy. Raman spectrometric results indicate that tantalum is coated on SQT surface in the form of Ta2O5. XPS studies revealed that the oxidation state of Pb in species trapped on both bare and Ta coated SQT surfaces is +2. For the accuracy check, the analyses of standard reference material were performed by use of SCP SCIENCE EnviroMAT Low (EU-L-2) and results for Pb were to be in good agreement with the certified value using SQT-AT-FAAS and Ta coated-SQT.

Determination of Tellurium in Lead Tellurium Residue Sample by Flame Atomic Absorption Spectrometry

Determination of Tellurium in Lead-Tellurium Sediment by Flame Atomic Absorption Spectrometry

Determination of Tellurium in Refined Antimony Slag by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of trace lead in tea by slotted quartz tube atomic absorption spectrometry

Flame Atomic Absorption Determination of Lead in Biological Materials Using A Flow Injection On-Line Separation and Preconcentration System Based on Ion-Pair Sorbent Extraction

Determination of Te in Soldering Tin Using Continuous Flowing Electrochemical Hydride Generation Atomic Fluorescence Spectrometry

Study on Method for Determining Lead in Blood with Hydride Generation Atomic Absorption Spectrometry

Determination of Trace Elements in Tea by Suspension Sampling-Flame Atomic Absorption Spectrometry

Determination of Trace Ag, Au, Ge, Pb, Sn and Te by Microwave Plasma Torch Atomic Emission Spectrometry Coupled with an Electrothermal Vaporization Sample Introduction System.

Electrodeposition as a Preconcentration and Sample Preparation Technique for Trace Selenium and Tellurium Determination by X-Ray Fluorescence Spectrometry

Determination of trace elements lead content in cosmetics with flame atom absorb spectrometry

DETERMINATION OF TRACE THALLIUM IN SOIL SAMPLES BY GFAAS WITH POLYURETHANE FOAM

Use of platinum as a modifier in the sensitive detection of tellurium in biological samples

Determination of Tin in in Copper,Lead and Zinc Ores by Emission Spectrometry

Lead determination at ng/mL level by flame atomic absorption spectrometry using a tantalum coated slotted quartz tube atom trap

Interference-free atomic spectrometric method for the determination of trace amounts of germanium by utilizing the vaporization of germanium tetrachloride

[Determination of thallium in the urine with colloidal palladium as the matrix modifier by graphite furnace atomic absorption Spectrometry]

Separation and determination of tellurium(IV) and tellurium(VI) using reversed-phase high-performance liquid chromatography-inductively coupled plasma mass spectrometry

[Determination of Trace Lead in Copper by Enhancing Effect FAAS-using Derivative Technique].

Direct Determination of Mercury in Solid Samples by Low Temperate Plasma Coupled with Atomic Fluorescence Spectrometry

Separation, Preconcentration, and Determination of Lead, Cadmium, and Iron Using Cloud Point Extraction with Flame Atomic Absorption Spectrometry