Abstract:Flow injection hydride generation atomic absorption spectrometry (FI-HGAAS) is a sensitive technique for the quantification of trace amounts of lead. However, plumbane generation is not straightforward and usually HG methods for lead are not robust enough for routine analysis. The optimum pH range for Pb HG is very narrow, so strict control of the acidity of the reaction medium is required for reliable results and in some cases even acid concentrations used for sample preservation can interfere. Moreover, some elements, like Cu, can interfere in the HG reaction suppressing the Pb signal. In this paper we report the development and validation of a method for the determination of Pb in water samples that is robust towards acidity and Cu levels usually found in water samples. All hydride generation parameters were optimized, but special emphasis was put on robustness. The use of borate as a buffer significantly improved the robustness of the method towards acidity, compared to the typical non-buffered HG. Furthermore, the interference of Cu, Sb and Sn in the HG reaction was overcome using thiocyanate as a masking agent. Other elements do not interfere at levels typically found in water samples. The limit of quantification achieved (0.9 μg L −1 ) is below the current guideline value for Pb in drinking water (10 μg L −1 ). The linearity of the method was verified between the LOQ and up to 15 μg L −1 . An analytical frequency of 25 samples per hour with 3 measurement replicates each was achieved. The method was applied to the analysis of 50 water samples. The concentrations found ranged from <lod (0.3="" l −1) and up to 88.8 μg L −1 . The proposed method is robust, cost-effective, easily automated and does not require unconventional or expensive equipment. It can be applied for routine analysis of different types of water samples.

Study on Method for Determining Lead in Blood with Hydride Generation Atomic Absorption Spectrometry

A Low Cost and Sensitive Procedure for Lead Screening in Human Whole Blood with Sequential Injection-Hydride Generation-Atomic Fluorescence Spectrometry

A real-time-range potentiostat coupled to nano-Au-modified microband electrode array for high-speed stripping determination of human blood lead

Determination of trace lead by hydride generation–inductively coupled plasma–mass spectrometry

Determination of lead in complex sample matrices by atomic fluorescence spectrometry: optimisation of online hydride generation

A robust method for the determination of lead in water samples using flow injection hydride generation atomic absorption spectrometry

Simultaneous Determination of Cd(II) and Pb(II) Ions in Honey and Milk Samples Using a Single-Walled Carbon Nanohorns Modified Screen-Printed Electrochemical Sensor.

A Simple and Sensitive Flow-Injection On-line Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry for the Determination of Ultra-trace Lead in Water, Wine, and Rice

Determination of Trace Amounts of Lead in Biological-Materials by Flow-Injection Hydride-Generation-Aas with Sensitivity Enhancements Using Nitroso-R-Salt

Determination of the Content of Lead in Cosmetics by Hydrogenation Combined with Atomic Fluorescent Spectrum

Rapid determination of lead in infants and young children formula milk powder by direct sample injection-graphite furnace atomic absorption spectrometry

Colorimetric Assay for Determination of Lead (ii) Based on Its Incorporation into Gold Nanoparticles During Their Synthesis

The Fast and Sensitive System for Determination of Blood Lead Based on the Integrated Film Electrodes Without Removal of Oxygen

Determination of Lead Concentration and Isotopic Ratios of Blood,Hair and Tissues in Rats by Inductively Coupled Plasma Mass Spectrometry

Graphite Furnace Atomic Absorption Spectrometry for Biomonitoring of Blood Lead Level in Quality Control Blood Materials

Determination of Mercury in Snake Powder by Atomic Fluoresence Spectrometry

Determination of Trace Antimong in Cells by Hydride Generation-Atomic Fluorescence Spectrometry

Determination Of Arsenic By Atomic Fluorescence Spectrometry With Bi-Anode Electrochemical Hydride Generation

Flame Atomic Absorption Determination of Lead in Biological Materials Using A Flow Injection On-Line Separation and Preconcentration System Based on Ion-Pair Sorbent Extraction

Separation, Preconcentration, and Determination of Lead, Cadmium, and Iron Using Cloud Point Extraction with Flame Atomic Absorption Spectrometry

Determination of Iron, Lead and Nickel in Zinc Powder by Atomic Absorption Spectrometry