Abstract:Biomonitoring of lead (Pb) in blood and urine enables quantitative evaluation of human occupational and environmental exposures to Pb. State-of-the-art ICP-MS instruments can only analyze metals in laboratories, resulting in lengthy turnaround times, and they are expensive. In response to the growing need for a metal analyzer capable of on-site, real-time monitoring of trace toxic metals in individuals, we developed a portable microanalyzer based on flow-injection/stripping voltammetry (ASV), and validated the system using rat blood and urine spiked with known amounts of Pb. Fouling of electrodes by proteins often prevents the effective use of electrochemical sensors in biological matrices. Minimization of such fouling was accomplished with suitable sample pretreatment and by establishing turbulent flow of blood and urine containing Pb onto the electrode inside the microanalyzer, which resulted in no apparent electrode fouling even when the samples contained 50% urine or 10% blood by volume. No matrix effect was observed for the voltammetric Pb signals, even when the samples contained 10% blood or 10% urine. The microanalyzer offered linear concentration ranges relevant to Pb exposure levels in humans (0-20 ppb in 10% blood samples, 0-50 ppb in 50% urine samples). The device showed excellent sensitivity and reproducibility; Pb detection limits were 0.44 ppb and 0.46 ppb, and % R.S.D. was 4.9 and 2.4 in 50% urine and 10% blood samples, respectively. It gave similar Pb concentrations in blood and urine to those measured by ICP-MS. It offered high throughput (3 min per sample) and economical use of samples (60 microL per measurement) as well as low reagent consumption (1 microg of Hg per measurement), thus minimizing environmental concerns associated with mercury use. Since it is miniaturized, the microanalyzer is portable and field-deployable. Thus, it shows much promise as the next-generation analyzer for the biomonitoring of toxic metals.

A real-time-range potentiostat coupled to nano-Au-modified microband electrode array for high-speed stripping determination of human blood lead

Design Of A Novel Hybrid Sensor With Microelectrode Array And Laps For Heavy Metal Determination Using Multivariate Nonlinear Calibration

Smart Voltammetric Procedure In An Automatic Trace Metal Monitoring System For Expanding The Measurement Range Of A Gold-Band Microelectrode Array

In Situ Determination of Cadmium and Lead in Water Environment Based on Microelectrode Array Combined PLS with Local Optimum Method

Wireless Instrumentation Design for Heavy Metals Detection in Water Based on Light Addressable Potentiometric Sensor

The Fast and Sensitive System for Determination of Blood Lead Based on the Integrated Film Electrodes Without Removal of Oxygen

The fast system for analyzing blood lead based on the integrated film electrodes

Optimization and evaluation of differential potential stripping analysis in determining the content of blood lead

Determination of Platinum in Human Plasma by Microchip-based Nanoflow Injection and Inductively Coupled Plasma Mass Spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Microanalyzer for biomonitoring lead (Pb) in blood and urine

A Low Cost and Sensitive Procedure for Lead Screening in Human Whole Blood with Sequential Injection-Hydride Generation-Atomic Fluorescence Spectrometry

A ZnO-nanorod/PEDOT:PSS nanocomposite functionalized bridge-like membrane type nanomechanical sensing device for ultrasensitive blood lead detection

Determination of Lead Concentration and Isotopic Ratios of Blood,Hair and Tissues in Rats by Inductively Coupled Plasma Mass Spectrometry

Engineering a PbrR-Based Biosensor for Cell-Free Detection of Lead at the Legal Limit

Highly sensitive and reproducible cyclodextrin-modified gold electrodes for probing trace lead in blood.

Screen-Printed Sensors Modified with Nafion and Mesoporous Carbon for Electrochemical Detection of Lead in Blood

Graphite Furnace Atomic Absorption Spectrometry for Biomonitoring of Blood Lead Level in Quality Control Blood Materials

Electrochemical sensor array with nanoporous gold nanolayer and ceria@gold corona-nanocomposites enhancer integrated into microfluidic for simultaneous ultrasensitive lead ion detection

A Reliable, Practical and Cost-Effective Portable Wireless Potentiostat for Mobile Chemical Sensing and Biosensing

New methodological approach for deep penetrating geochemistry and environmental studies part 2: field determination of Co(II) /Ni(II) and Pb(II) /Zn(II) of on-site soil extractions by electrochemical stripping techniques