Abstract:There is a growing concern about the effect of palladium on human health because of the toxicity and increasing occurrence of palladium as a result of its extensive use in automotive catalytic converters. Development of reliable analytical methodologies for the determination of palladium in environmental materials is of great importance for critical evaluation of the possible risks for human health. In this work, a displacement solid-phase extraction technique was developed and online coupled to electrothermal atomic absorption spectrometry (ETAAS) for selective and sensitive determination of trace palladium in environmental samples without need of any special selective complexing agents, selective sorbents, and masking agents. The developed methodology involved the online formation of copper pyrrolidine dithiocarbamate (Cu-PDC), and the resultant Cu-PDC was extracted onto a microcolumn packed with the sorbent from a cigarette filter. Trace Pd(II) was selectively preconcentrated through loading the sample solution onto the microcolumn by online displacement reaction between Pd(II) and the extracted Cu-PDC on the microcolumn. The retained analyte was subsequently eluted with 40 microL of ethanol for online ETAAS determination. Interferences from coexisting heavy metal ions with lower stability of their PDC complexes relative to Cu-PDC were minimized. The tolerable concentrations of Cd-(II), Fe(III), Co(II), Mn(II), Cr(III), and Zn(II) were up to 2, 6, 40, 2, 1.5, and at least 100 mg L(-1), respectively. Compared with conventional solid-phase extraction methodology, the developed displacement solid-phase extraction protocol gave 2-4 orders of magnitude improvement in the maximum tolerable concentrations of coexisting heavy metal ions. With the consumption of only 2.8 mL of sample solution, an enhancement factor of 52 and a detection limit (3sigma) of 18 ng L(-1) were achieved at a sample throughput of 30 samples h(-1). The precision (RSD, n = 13) was 2.5% at the 1 microg L(-1) level. The present methodology was successfully applied to selective determination of trace palladium in local road dusts and roadside soils.

[Determination of thallium in the urine with colloidal palladium as the matrix modifier by graphite furnace atomic absorption Spectrometry]

Effectiveness of palladium matrix modification for the determination of thallium by graphite furnace atomic absorption spectrometry

Determination of trace thallium by flow injection combined with graphite furnace atomic absorption spectrometer based on immobilized p -dimethylaminobenzylidenerhodanine separation and preconcentration

Control of spectral and non-spectral interferences in the determination of thallium in river and marine sediments using solid sampling electrothermal atomic absorption spectrometry

A Sequential Injection On-Line Column Preconcentration System for Electrothermal AAS Determination of Thallium in Geochemical Samples

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Determination of thiols in urinary sample by capillary-column liquid chromatography with amperometric detection at a carbon electrode.

Direct determination of tin in whole blood and urine by GF AAS

Anodic Stripping Voltammetric Procedure of Thallium(I) Determination by Means of a Bismuth-Plated Gold-Based Microelectrode Array

[Determination of cadmium in human urine by colloidal gold immunochromatographic assay]

Solution Cathode Glow Discharge – Atomic Emission Spectrometry (SCGD-AES) With an Interference Filter for Spectral Discrimination for the Determination of Thallium in Surface Water

[Efficiency of hemoperfusion on clearing thallium based on atomic absorption spectrometry].

Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry

DETERMINATION OF FOUR ARSENIC SPECIES IN ALGAE BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY COUPLED WITH HYDRIDE GENERATION ATOMIC FLUORESCENCE SPECTROMETRY

Determination Of Arsenic By Atomic Fluorescence Spectrometry With Bi-Anode Electrochemical Hydride Generation

Determination of Trace Cobalt in Water Samples by Ionic Liquid-Dispersive Liquid–Liquid Microextraction and Graphite Furnace Atomic Absorption Spectrometry

A sensitive cadmium-affinity assay for the determination of thionein in urine

In Situ Measurement of Thallium in Natural Waters by a Technique Based on Diffusive Gradients in Thin Films Containing a Δ-Mno2 Gel Layer.

Determination of Trace and Ultra-Trace Amounts of Germanium in Environmental Samples by Preconcentration in a Graphite Furnace Using a Flow Injection Hydride Generation Technique

Determination of aluminium in puffed food by graphite furnace atomic absorption spectrometry

Selective quantification of trace palladium in road dusts and roadside soils by displacement solid-phase extraction online coupled with electrothermal atomic absorption spectrometry.