Abstract:In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis.

Probe Radius Compensation of Workpiece Localization

A Radius Error Compensation Model Of Touch Trigger Probes In On-Machine Verification System

Analysis and Modeling of the Radius Error of Touch Trigger Probes in On-machine Verification System

Error Correction Of Laser Scanning System For Reverse Engineering

Accurate Compensation Method for Probe Pre-Travel Errors in On-Machine Inspections

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Comparison of Three Compensation Methods for the Touch-trigger Probe Pretravel Errors

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Error Compensation Based on Surface Reconstruction for Industrial Robot on Two-Dimensional Manifold.

Study on Mechanism and Software Compensation for Radial Motion Errors of NC Machine Tools

Precision Measurement of Z -Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-Probe Method

Pose calibration of line structured light probe based on ball bar target in cylindrical coordinate measuring machines

Positioning Error Compensation on Two-Dimensional Manifold for Robotic Machining

Touch-Trigger Probe Error Compensation for Nonvertical On-Machine Measurement of Freeform Surface Workpieces

A novel 3D radius compensation method of probe stylus tip in the free-form surface profile curve scanning measurement

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM

An Accurate Probe Pre-Travel Error Compensation Model for Five-Axis On-Machine Inspection System

Efficient Calibration of a Scanning Probe on CMM

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Calibration Of Five-Axis Machine Tools By A Scanning Probe

Error identification and compensation for a laser displacement sensor based on on-machine measurement