Abstract:Natural woods as a raw material have been taking a considerable interest topic by industries such as the forest industry, furniture manufacturing, and nowadays suitable electronics. One of the most essential steps of manufacturing for those industry purposes is RF heating/drying of raw wood material nowadays. However, knowing the electrical properties, such as the dielectric constant of wood-based material before processing is tremendously important. It is well-known that the moisture content and density levels of material directly affect the dielectric properties. Moisture and density conditions are different in each material because it’s related directly to the absorption and affection of material towards moisture sources. Therefore, in this study of wood material under varying conditions, proper empiric models have been generated to express this relationship. This study is based on three different softwood specimens widely used in the forest industry. The dielectric properties were determined in the frequency range of 2.17 GHz-6.0 GHz as a function of moisture content and density for wood species. Each measurement contains 500 raw data points; a vector network analyzer collected 49,500 S-parameter data. Each wood specimen consists of six samples; the average of data obtained from these samples was considered as a dielectric measure for the examined wood specimen. The proposed empiric models have RMSE better than 0.05 for the relation between loss tangent and density, while the proposed empiric models for dielectric permittivity have better than 0.90 with density relation, which is considered an acceptable ratio for model generation.

Measurement of the Dynamic Modulus of Elasticity of Wood Panels

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Measurement and Analysis of the Vibration Responses of Piano Soundboards with Different Structures

Evaluating Mechanical Properties of Chinese-fir with Ultrasonic Nondestructive Testing

Measuring elastic constants of wood through static bending using a strain gauge

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Radial Variations of Vibrational Properties of Three Tropical Woods

THE EFFECT OF MOISTURE CONTENT ON ELECTRICAL PROPERTIES OF SELECTED SOFTWOODS; CEDAR, JUNIPER, AND PINE

Full elastic properties characterization of wood by ultrasound using a single sample

Dynamic Young’s Modulus and Moisture Content of Tropical Wood Species across Sap, Median, and Internal Wood Regions

EVALUATION OF DYNAMIC AND STATIC MODULI OF ELASTICITY OF HYBRID EUCALYPTUS WOOD FROM DIFFERENT LOCATIONS IN GHANA

Temperature and time dependence of orthotropic viscoelastic properties of moist wood determined in tensile mode

Vibration Testing for the Evaluation of the Effects of Moisture Content on the In-Plane Elastic Constants of Wood Used in Musical Instruments

Static Method and Stress Wave Nondestructive Testing Study on Modulus of Elasticity of Wood

Preliminary Study on Detection of Wood Structure Defects and Evaluation of Residual Elastic Modulus

Study on damage and fracture characteristics of wood based on acoustic emission b-value and seismic magnitude difference entropy

Prediction Moisture Content and Strength of Wood Using Free-Space Microwave Transmission Line NDT