Abstract:Ultrasonic-guided waves (GWs) have shown a high potential to be applied to the structural integrity of timber utility poles to detect and assess distinct types of defects. Yet, there are many challenges associated with this method, which may hinder its application, including the orthotropic nature of the timber, the presence of natural cracking, and the effect of environmental factors such as temperature and moisture content (MC) on the propagation of GWs. This study aims to scrutinize the effect of MCs ranging from 0 to 24%, and temperatures between − 20 and 100 °C on the propagation characteristics of GWs (longitudinal and circumferential) in cylinder timber structures excited over a range of frequencies between 10 and 20 kHz, experimentally and numerically. The numerical analysis was carried out using COMSOL Multiphysics, and Macro Fiber Composites were used to excite and sense the GWs. The anisotropic nature of timber poles was modeled using a transversely isotropic behavior. The results showed that the effect of timber's temperature and MC on the GWs should be assessed simultaneously. Three-dimensional maps were generated to present the relationship between various wave modes, temperature, and MC. The work observed a larger critical role of MC than the temperature on the propagating GWs and timber's material properties. The effect of temperature is more critical when timber's MC increases above the fiber saturation point (FSP) due to high stiffness variations. This is seen as the group velocities of the longitudinal and flexural waves (as well as the bulk wave) shifted more at MCs above FSP than below FSP. When MC varies above FSP with no temperature variations the velocity difference is negligible with 1.5% due to complete timber saturation at all temperature values. The results showed that the change in the mode velocities in dry wood is not significant with varying temperatures, as the stiffness changes by 0.07%. Experimental validation, for the numerical results, showed low differences for the bulk wave, and flexural modes were within [7.1 15]% and [1.3 4.7]% for the 2nd flexural branch at 12.5 kHz, respectively. Based on the above results, the environmental conditions can highly impact the GWs characteristics in timber structures, hence this should be carefully considered in the application phase.

Dynamic Young’s Modulus and Moisture Content of Tropical Wood Species across Sap, Median, and Internal Wood Regions

Radial Variations of Vibrational Properties of Three Tropical Woods

EVALUATION OF DYNAMIC AND STATIC MODULI OF ELASTICITY OF HYBRID EUCALYPTUS WOOD FROM DIFFERENT LOCATIONS IN GHANA

Moisture content estimation of green softwood logs of three species based on measurements of flexural vibration

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

Viscoelastic properties of green wood across the grain measured by harmonic tests in the range of 0\degree C to 95\degree C. Hardwood vs. softwood and normal wood vs. reaction wood

Identification of anisotropic vibrational properties of Padauk wood with interlocked grain

THE EFFECT OF MOISTURE CONTENT ON ELECTRICAL PROPERTIES OF SELECTED SOFTWOODS; CEDAR, JUNIPER, AND PINE

Vibration Testing for the Evaluation of the Effects of Moisture Content on the In-Plane Elastic Constants of Wood Used in Musical Instruments

Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood

Viscoelastic properties of wood materials characterized by nanoindentation experiments

Influence of timber moisture content on wave time-of-flight and longitudinal natural frequency in coniferous species for different instruments

A Survey on the Effect of the Chemical Composition on the Thermal, Physical, Mechanical, and Dynamic Mechanical Thermal Analysis of Three Brazilian Wood Species

Temperature and time dependence of orthotropic viscoelastic properties of moist wood determined in tensile mode

The effect of moisture content and temperature on the propagation characteristics of guided waves in timber utility poles-numerical and experimental validation

Prediction Moisture Content and Strength of Wood Using Free-Space Microwave Transmission Line NDT

A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

Physico-Mechanical and Anatomical Properties of Normal and Tension Woods of Terminalia Superba (Engl. & Diels)

Early prediction of basic density, shrinking, presence of growth stress, and dynamic elastic modulus based on the morphological tree parameters of Tectona grandis

Finite Element Modeling of the Dynamic Response of Plywood

Short-term hygro-mechanical behaviour of lime wood ( Tilia cordata ) in principal anatomical directions