Abstract:More and more composite materials have been being utilized in nuclear facilities. While the external loading applied, the stress in composite is concentrated, which is harmful and may cause interfacial damage. The debonding and sliding at the interface between matrix and particles are the most common phenomena. In this paper, a statistically elastoplastic constitutive model for particle-dispersed composites is developed by accounting stochastically for both interfacial damage and localized plasticity. The effects of damaged interface on the strain field in composite are considered in two ways. First, the damaged interface between the matrix and the particles makes the strain field inside inclusions is different from that of the particles with perfectly bonded interface. Second, it contributes an additional strain, which is due to the displacement jump at the matrix-inclusion interface. This additional is defined as an integration of displacement jumps between the matrix and the particles over their interface. In present paper, the first part is considered by using a modified Eshelby’s S-tensor. After deriving the local relative displacement distributions between matrix and inclusion at the interface, the second contribution of damaged interface to the average strain can be expressed in terms of the corresponding eigen-strain or the uniform external loading, by introducing the damage-relevant tensors, which are transformation tensors and tends to zero if interfacial damage does not take place. Both the tangential and normal discontinuities at the interface are independently modeled. The model uses statistic scheme with distribution functions in the stress/strain space, so that the meso-local effects of plastic deformation, interfacial damage and their interactions are accounted for. In order to verify the feasibility and performance of the proposed constitutive model, numerical calculations are carried out. It is found that the damaged interface conditions of debonding and/or sliding give detrimental effects on the overall properties of composites. Thus, the establishment of the most appropriate model describing properly the meso-local phenomena.

Load transfer in a composite containing a broken fiber with imperfect bonding

Micro Failure Analysis of Fiber Metal Laminates

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Dynamic Tensile Behavior of Fiber Reinforced Materials Based on Fiber Layering Modeling

Debonding mechanisms in the presence of an interphase in composites

541 Modeling of particle dispersed composite with meso-scale delamination or sliding

Analysis of Particle-Dispersed Composites Accounting Stochastically for Interfacial Damage

Interface Debonding Criteria in SiC Fiber-Reinforced Composites

Application of a linear elastic - brittle interface model to the crack initiation and propagation at fibre-matrix interface under biaxial transverse loads

Properties of Frictional Bridging in Fiber Pull-out for Fiber-Reinforced Composites

The effect of imperfect bonding on stress distribution in fibrous composites

Effect of Stochastic Loading on Tensile Damage and Fracture of Fiber-Reinforced Ceramic-Matrix Composites

Compressive Failure of Fiber Reinforced Polymer Composites by Imperfection

3-D Elastic Analysis of Stress Transference Mechanism at the Interfaces in Fiber Reinforced Concrete

Cyclically Thermomechanical Plasticity Analysis for a Broken Fiber in Ductile Matrix Composites Using Shear Lag Model

A cohesive zone model incorporating a Coulomb friction law for fiber-reinforced composites

An insight into the mechanical behavior and failure mechanisms of T-stiffened composite structures with through-interface debonding defects

Analysis for a Broken and Debonging Fiber in Ductile Matrix Composites

A cohesive zone model for the elevated temperature interfacial debonding and frictional sliding behavior

Coulomb frictional interfacial stresstransfer in fiber pull-out