Abstract:Surface modifications are known as efficient technologies for advanced carbon fibers to achieve significant improvement of interface adhesion in composites, one of which is to increase the surface roughness in the fiber's longitudinal direction in practice. As a result, many microridges and grooves are produced on carbon fiber's surfaces. How does the surface roughness influence the carbon fiber's pull-out behavior? Are there any restrictions on the relation between the aspect ratio and surface roughness of fibers in order to obtain an optimal interface? Considering the real morphology on carbon fiber's surface, i.e., longitudinal roughness, an improved shear-lag theoretical model is developed in this paper in order to investigate the interface characteristics and fiber pull-out for carbon fiber-reinforced thermosetting epoxy resin (brittle) composites. Closed-form solutions to the carbon fiber stress are obtained as well as the analytical load-displacement relation during pullout, and the apparent interfacial shear strength (IFSS). It is found that the interfacial adhesion and the apparent IFSS are effectively strengthened and improved due to the surface roughness of carbon fibers. Under a given tensile load, an increasing roughness will result in a decreasing fiber stress in the debonded zone and a decreasing debonded length. Furthermore, it is interesting to find that, for a determined surface roughness, an optimal aspect ratio, about 30 similar to 45, of carbon fibers exists, at which the apparent IFSS could achieve the maximum. Comparison to the existing experiments shows that the theoretical model is feasible and reasonable to predict the experimental results, and the theoretical results should have an instructive significance for practical designs of carbon/epoxy composites.

Coulomb frictional interfacial stresstransfer in fiber pull-out

Keynote: EXPLICIT MODELLING OF FIBRE PULLOUT IN CEMENTITIOUS COMPOSITES

Properties of Frictional Bridging in Fiber Pull-out for Fiber-Reinforced Composites

Interfacial Stress Transfer Behavior in a Specially-Shaped Fiber/matrix Pullout Test

Analysis of energy release rate for interfacial debonding in fiber pull-out by using stress functions

Dynamic Tensile Behavior of Fiber Reinforced Materials Based on Fiber Layering Modeling

Finite element simulation of fiber pullout in fiber reinforced ceramic matrix composites

A cohesive zone model for the elevated temperature interfacial debonding and frictional sliding behavior

Interfacial Stress Transfer Behavior of Single-Fiber Composite under the Effect of Mechanical and Thermal Loading

Analyses of the Micromechanics of Stress Transfer in Single- and Multi-Fiber Pull-Out Tests

Some Further Considerations of the Theory of Fibre Debonding and Pull-out from an Elastic Matrix. Part 1: Constant Interfacial Frictional Shear Stress

Some Further Considerations of the Theory of Fibre Debonding and Pull-out from an Elastic Matrix. Part 2: Non-constant Interfacial Frictional Shear Stress

A frictional cohesive zone model for characterizing transverse compression responses of unidirectional fiber-reinforced polymer composites

Comparison of the Stress Transfer in Single- and Multi-Fiber Composite Pull-out Tests

Inclined Fiber Pullout From A Cementitious Matrix: A Numerical Study

Modeling of push-out test for interfacial fracture toughness of fiber-reinforced composites

Stress transfer of a Kevlar 49 fiber pullout test studied by micro-Raman spectroscopy.

The fibre pull-out energy of misaligned short fibre composites

STUDY OF INTERFACIAL STRESS OF SINGLE-FIBER COMPOSITE BY PHOTO-ELASTIC EXPERIMENT

Effects of the Longitudinal Surface Roughness on Fiber Pull-Out Behavior in Carbon Fiber-Reinforced Epoxy Resin Composites

A micromechanical model of interfacial debonding and elementary fiber pull-out for sisal fiber-reinforced composites