Abstract:Bi(2/3)‐xSmxCu3Ti4O12 (BSCTO x = 0.05, 0.10, and 0.20) ceramics are successfully synthesized by semi‐wet route. The dielectric constant and tan δ for ceramics are found to decreases as the doping concentration increases. Due to their low dielectric loss and high dielectric constant, Sm‐doped BCTO ceramics appear to be a good candidate for high capacitance density applications at high frequencies. Bi(2/3)‐xSmxCu3Ti4O12 (BSCTO x = 0.05, 0.10, and 0.20) ceramics are synthesized using semi‐wet technique and an extensive investigation into their structural, morphological, and elemental properties, alongside dielectric and impedance behaviors, is meticulously carried out. X‐ray powder diffraction analysis unequivocally confirmed the formation of a monophasic BCTO cubic phase without any discernible secondary phases. and the crystallite size of the BSCTO ceramic, obtained by X‐ray diffraction using Debye Scherrer formula, range from 62 to 81 nm. Rietveld analysis reveals that ceramics have a body centered cubic structure with space group Im‐3. The Scanning electron microscope image displays the dense microstructure of the ceramics, while EDX analysis unveils the elemental composition of resulting products. Doping with Sm3+ induced a notable reduction in grain size, as observed through Scanning electron microscope and Atomic Force Microscope analyses, indicating Sm3+ hindered grain growth during sintering, potentially resulting in reduced dielectric constant (ε′). Dielectric constant and dielectric loss of the composition (x = 0.2) are found to be ≈152 and 0.04, respectively at room temperature (1 kHz). Impedance characteristics revealed a substantial increase in grain boundary resistance, leading to improved dielectric loss. The AC conductivity of BSCTO ceramics exhibited a frequency‐dependent increase satisfying to Johncher's power law.

Synthesis of Sm-Doped Batio3 Ceramics and Characterization of A Secondary Phase

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Dopant behaviours of Sm2O3 on microstructure and properties of barium zirconium titanate ceramics

Dopant Behaviours of Sm_2O_3 on Microstructure and Properties of Barium Zirconium Titanate Ceramics

Fabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth Titanate Ceramics

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

Synthesis and Characterization of La-Doped Nano-Batio3-Based Positive Temperature Coefficient of Resistivity Ceramics

The Effect of Sm2o3-Dopant on the Microstructure and Dielectric Properties of Bazrxti1-Xo3 Ceramics

Enhancement of Positive Temperature Coefficient Resistance Effect of Batio3-Based Semiconducting Ceramics Caused by B2o3 Vapor Dopants

INFLUENCE OF Sm2O3 ADDITION ON DIELECTRIC PROPERTIES OF BaTi0.95Sn0.05O3 CERAMICS

Positive Temperature Coefficient Resistance Effect in Ba1-xSrxTiO3 Ceramics Modified with Bi2O3 and PbO by a Vapor-Doping Method

Phase Transition in Ba6−3x(Sm1−yLay)6+2xTi18O54 (x=0.5) Ceramics

Investigation of Structural, Dielectric and Electrical Properties of Barium Titanate Ceramics Co-Doped with Bismuth and Yttrium

Dielectric and structural studies of ferroelectric phase evolution in dipole pair substituted barium titanate ceramics

Microstructure and Dielectric Properties of Batio3-La2o3-Mgo Ceramic

Impedance Spectroscopy of Sm-Doped of BaBi2Nb2O9 Aurivillius Ceramics

Effects of Al2o3-Doping on the Microstructure and Dielectric Properties of Ba4sm9.33ti18o54 Ceramics

Synthesis and characterization of BaTiO 3-(Bi 0.5Na 0.5)TiO 3 solid solution based dielectric ceramics

Phase Evolution, Dielectric, and Electric Behavior of Sm‐Doped BCTO Ceramic Fabricated by Semi‐Wet Method

Densification and Microwave Dielectric Properties of Ca1.15Sm0.85Al0.85Ti0.15O4 Ceramics with B2O3 Addition

Doping Behaviors of Nb2O5 and Co2O3 in Temperature Stable BaTiO3-based Ceramics