Abstract:As a temperature self-regulating heater material, the doped BaTiO 3 exhibits an attractive application perspective in the thermal management of electrical devices. However, the high Curie temperature does not meet the requirement in the thermal control application. In this work, (Ba 0.997− x Ce 0.003 Sr x )(TiNb 0.002 )O 3 ( x =0.2, 0.3, 0.35, abbreviated as BCSTNs) ceramics were prepared by the solid-state reaction method. The purpose of doping different content of strontium is to shift the Curie temperature of BaTiO 3 -based ceramic to the ambient temperature region, maintaining excellent PTC effect and low room-temperature resistivity by codoped cation ions in Ba- and Ti-site. The influences of sintering temperature and soak time on the microstructure as well as electrical properties of BCSTNs ceramics have been studied. The X-ray diffraction reveals that the composition with x =0.35 exhibits the coexistence of tetragonal and cubic lattice symmetries, confirmed by the Rietveld structure refinement. The dense microstructure with average grain sizes 0.84–7.87 μm was observed for BCSTN ceramics. Temperature-resistivity measurements demonstrate that T C of the ceramics with x =0.35 shifted to the room temperature region. Additionally, the BCSTN ceramic with heavy doping Sr exhibits relative low room-temperature resistivity and the resistance jump greater than 2.0 orders of magnitude.

Synthesis and Characterization of La-Doped Nano-Batio3-Based Positive Temperature Coefficient of Resistivity Ceramics

Sol–gel Synthesis and Characterisation of La Doped (1−x)batio3–x(bi0·5k0·5)tio3ptcr Ceramics

Study on Positive Temperature Coefficient of Resistivity of Co-Doped BaTiO3 with Curie Temperature in Room Temperature Region

Influence of La and Y Codoping on the Behaviors of BaTiO_3-based PTC Ceramics

Influence of Sintering Time and Donor Concentration on the PTCR Effect of La-doped BaTiO3-Na0.5Bi0.5TiO3 Ceramics

Structure and Dielectric Behavior of La-Doped BaTiO<sub>3</sub> Ceramics

Structure and Dielectric Behavior of La-Doped BaTiO3 Ceramics

Synthesis of Sm-Doped Batio3 Ceramics and Characterization of A Secondary Phase

Investigation on the Microstructure and Dielectric Properties of Batio3-Nb2o5-Fe2o3 Materials Doped with La2o3

Preparation and electrical property of Nd doped BaTiO3-based PTC ceramic powder

Influence of Bi and Nb Codoping on the Behaviors of BaTiO3-Based PTC Ceramics

Enhancement of Positive Temperature Coefficient Resistance Effect of Batio3-Based Semiconducting Ceramics Caused by B2o3 Vapor Dopants

Dielectric Properties and Electrical Conduction of La 2 O 3 -Doped (bi 0.5 Na 0.5 ) 0.94 Ba 0.06 TiO 3 Ceramics

Foreign Dopant Influences on Properties of (ba_(0.92)sr_(0.08))tio_3 Ceramics

Preparation and Properties of Liquid Y, Nb-codoped BaTiO3-based PTC Ceramics

Effect of SrLi<sub>1/4</sub>Nb<sub>3/4</sub>O<sub>3</sub> Additive on the Properties of Pb<sub>x</sub>Sr<sub>1-x</sub>TiO<sub>3</sub> Ceramics

Fabrication of La3+ doped Ba1- x La x TiO3 ceramics with improved dielectric and ferroelectric properties using a composite-hydroxide-mediated method

Synthesis and characterization of BaTiO 3-(Bi 0.5Na 0.5)TiO 3 solid solution based dielectric ceramics

High Temperature Stability “li+–al3+” Co-Doped BaTiO3 Piezoelectric Ceramic

Preparation of Nano BaTiO3-based PTC Ceramics Powder and Its Electrical Properties

Effect of rare earth oxides on the temperature characteristics of BaTiO3-based ceramics