Abstract:Hybrid cable-stayed suspension bridges combine the advantages of cable-stayed and suspension bridges, mitigating their deficiencies. Due to its super spanning ability, this novel form of bridge enjoys a bright application prospect as a large-span structure. This study introduces an analytical algorithm to estimate the full-bridge response of a hybrid cable-stayed suspension bridge with a vertical uniformly distributed load applied to the main beam. This method is based on the assumption that all parameters, such as the geometric configuration, internal force distribution, and material properties, of the whole bridge under a dead load are known; then, it analyzes the full-bridge response under a live load. First, the minimum and independent basic unknown parameters of the full-bridge response are determined. Next, the governing equations are derived and solved based on the conservation of unstressed length of each section of cable, closure of span lengths and elevation difference in different spans, and conditions for stress balance of the main beam. Thus, the values of basic unknown parameters are obtained. Finally, they are substituted into the governing equations to estimate the full-bridge response, including each bridge component's internal forces and deflections. The proposed analytical method involves no iterative procedures when dealing with nonlinear problems but only focuses on the bridge's state with and without loading. The results are obtained directly by solving the equations, which have the advantages of high efficiency, simplicity, and clear physical meaning. Finally, the feasibility and effectiveness of the proposed method are verified by a finite-element-based calculation of an exemplary asymmetric cable-stayed suspension cooperation system bridge with a main span of 1400 m.

Unstressed Cable Length and Geometric Linear Control of Hybrid Girder Cable-Stayed Bridge with 1000 m Sale Span

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Control of Erection of Hybridized Space Structure Using the Modified Cyclic Iteration and Initial Length Control Methods

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Construction Control of the Yamen Cable-Stayed Bridge

Study of Cable Force of Construction Control and Alignment Control of Main Girders for Long-Span Railway Cable-Stayed Bridges

Research on the construction control technology of large span cable-stayed bridge tower and girder

Construction Control of a Long Span Light Urban Rail Transit Cable-Stayed Bridge: a Case Study

Optimization and control of cable forces in a hybrid beam cable-stayed bridge based on a distributed algorithm

Method Of Reasonable Finished State Of Concrete Inclined Pylon Cable-Stayed Bridge With Backstays

Analytical Methods for Determining the Cable Configuration and Construction Parameters of a Suspension Bridge

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Construction Control of South Navigable Cable-Stayed Bridge of Hangzhou Bay Sea-Crossing Bridge

Typical Problems and Its Solutions in Construction Control of Suspension Bridges

Mechanical Behavior and Track Geometry Evaluation of Long-Span Cable-Stayed Bridges with Ballastless Tracks

Geometry control simulation for long-span steel cable-stayed bridges based on geometrically nonlinear analysis

Analysis of Parameter Sensitivity of Long Span Composite Girder Cable-Stayed Bridge

Analysis of Elasto-Plastic Ultimate Load Bearing Capacity of Long Span Hybrid Girder Cable-Stayed Bridge

Research on the Key Technology of Hybrid Beam Cable-stayed Bridge with Limit Side Mid-span Ratio

Analytical Algorithm for the Full-Bridge Response of Hybrid Cable-Stayed Suspension Bridges under a Horizontal Transverse Live Load