Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

Control of Erection of Hybridized Space Structure Using the Modified Cyclic Iteration and Initial Length Control Methods

Force Finding Analysis of Hybrid Space Structures

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Study on Prestress Distribution and Structural Performance of Heptagonal Six-Five-strut Alternated Cable Dome with Inner Hole

Analysis method of cable's prestressing force correction construction for prestressed space structures

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

THEORETICAL ANALYSIS OF CONSTRUCTION PROCEDURES OF CABLE-DOMES

Shape and Force Control of Prestressed Cable-Strut Structures Based on Nonlinear Force Method

METHOD OF CABLE FORCE CONTROL DURING ACCUMULATIVE SLIDING CONSTRUCTION FOR PRETENSIONED RETICULATED STRUCTURES

Non-Linear Displacement Control of Prestressed Cable Structures

Research on force control theory of adaptive beam sting structure

DYNAMIC CONTROL OF TENSION STRUCTURES

Experiment on cable tension and adjustment of truss string structure

Prestressing Analysis And Inspection For Hybridized Structure Composed Of Prestressed Reticulated Shell And Steel Arch

Cables' Tension and Their Prestress Control of Cable-Stayed Spatial Reticulated Structure

Theoretical and experimental study on the construction of cable domes

Method of Cable Tension Controlling in the Long-span Cable-stayed Bridge Construction