Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Analysis of Elasto-Plastic Ultimate Load Bearing Capacity of Long Span Hybrid Girder Cable-Stayed Bridge

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Safety Factor for Steel and Carbon Fiber Reinforced Plastic Cables of Long-Span Cable-Stayed Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Analysis of Ultimate Loading Capacity of the Prestressed Concrete Curved Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Predicting the Ultimate Load Capacity of Extradosed Cable-Stayed Bridges: A Novel Method

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Structural Performance and Strength Prediction of Steel-To-Concrete Box Girder Deck Transition Zone of Hybrid Steel-Concrete Cable-Stayed Bridges

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Inspection and Evaluation of Load-Bearing Capacity of Single Tower Composite Girder Cable -Stayed Bridge