Abstract:Although CO2 capture by chemical absorption can achieve highly efficient removal of CO2 from flue gas, the energy consumption of absorbent regeneration is high, and the CO2 after desorption need to be compressed, transported and sequestrated. To reduce energy consumption and sequestrate CO2 at low cost, an CO2 desorption process was developed, in which the CO2-rich solutions was regenerated and CO2 was sequestrated in the form of CaCO3. Five kinds of CO2-rich solutions, monoethanolamine (MEA), methyldiethanolamine (MDEA), potassium glycinate (PG), MDEA/MEA and MDEA/PG were investigated by adding calcium hydroxide. The optimum reaction condition, which CO2 loading was 0.621 mol/L and Ca(OH)2 dosage was 1:1 for desorption of CO2-rich solution, was determined. And the effects of three parameters (time, temperature and stirring rate) on CO2 desorption rate were further analyzed. The optimum reaction temperature for the amine absorbents and the amino acid salt solvents were 20℃ and 50℃, respectively. The optimum reaction time and standing time were 30 min, respectively, and the optimum stirring rate was 800 r/min. MEA exhibited the highest desorption rate (85.31%) among the five solutions. In addition, the results of multicycle-cycle experiments showed that the MEA lean solution desorbed by chemical desorption still had excellent absorption capacity. Compared with the conventional thermal desorption process, the chemical desorption process had great advantages for CO2-rich solutions regeneration and did not require further treatment of CO2.

Experiments Study of Absorption Solution Performance of CO2 Sequestration in Flue Gas Using Membrane Absorption

Research Progress in Removal of CO2 from Closed Spaces by Membrane Technology

Experimental Comparison of Flue Gas CO_2 Separation with Membrane Absorption and Chemical Absorption

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Experimental Study and Modified Modeling on Effect of SO2 on CO2 Absorption Using Amine Solution

Experimental and Modeling Study of Trace CO2 Removal in a Hollow-Fiber Membrane Contactor, Using CO2-Loaded Monoethanolamine

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

CO2 separation from flue gases by polypropylene hollow fiber membrane contactor

Comparative Analysis of CO2 Separation from Flue Gas by Membrane Gas Absorption Technology and Chemical Absorption Technology in China

Separation of CO2 in Flue Gas by Membrane Absorption in China

Experimental study on the absorption of CO 2 from flue gas by aqueous solutions of methyldiethanolamine + potassium glycinate in hollow fiber membrane contactor

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting

Experimental Study on Absorption of Carbon Dioxide in Flue Gas by Monoethanolamine Fine Spray

Experimental research on chemical desorption based on CO2-rich absorption solutions

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Comparison of Dissociation Performance of CO_2 from Flue Gas by Hollow Fiber Membrane Contactors

Kinetics of absorption of CO2 into aqueous MEA solutions

Semi-batch experimental study on CO2 absorption characteristic of aqueous ammonia

Mixed Amine Absorbent based on Hollow Fiber Membrane Contactor Removes CO2 from Flue Gas

Theoretical investigations on the effect of absorbent type on carbon dioxide capture in hollow-fiber membrane contactors