Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Coupling of Electrostatic-Elastic of Micro Actuator Based on Rayleigh-Ritz Energy Method

Modeling and Simulation of Electrostatic Micropump Based on MEMS

Macromodeling of the electrostatically actuated circular plate based on mode superposition method

Modal Analysis of Liquid-solid Coupling System of Flat-walled Valveless Micropumps

Modeling of a micropump membrane with electrostatic actuator

RESEARCH ON PULL-IN AND RELEASE PHENOMENON OF ELECTROSTATIC MICROPUMPS

Coupled Analysis on the Piezoelectric-Elastic Micro Actuator

Macromodeling Of The Electrostatically Actuated Rectangle Plate Based On Modal Projection

Macro modeling method for electrostatic-drive silicon diaphragm

Research On Terminal Behavior Of Electrostatically Actuated Micropump Membrane Based On Modal Analysis - Art. No. 60400u

Coupled Analysis on the Micro-Airflow and Its Actuator for Mems Fluidic Devices

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

Micro-Structronics and Control of Hybrid Electrostrictive/Piezoelectric Thin Shells

Micro Electromagnetic Actuator For Micropump

The application of micro field theory to MEMS actuators

Structronics and Actuation of Hybrid Electrostrictive/Piezoelectric Thin Shells

Mechanical Behaviors Research and the Structural Design of a Bipolar Electrostatic Actuation Microbeam Resonator

Micro Electromagnetic Actuator with High Energy Density Based on MEMS Technology

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error