Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Preparation of Monolithic Carbon Aerogels and Investigation of Their Pore Interconnectivity by a Nanocasting Pathway

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Synthesis of Monolithic Carbon Aerogels with High Mechanical Strength Via Ambient Pressure Drying Without Solvent Exchange

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

The preparation of carbon aerogels based upon the gelation of resorcinol–furfural in isopropanol with organic base catalyst

Preparation of Silica Aerogels by Non-Supercritical Drying

The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient Dry

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Formation and control of structure of carbon aerogel

Synthesis of ultrahigh-pore-volume carbon aerogels through a “reinforced-concrete” modified sol–gel process

Hierarchically Porous Carbon Aerogels with High Specific Surface Area Prepared from Ionic Liquids Via Salt Templating Method

A scalable molecular-templating strategy toward well-defined microporous carbon aerogels for efficient water treatment and electrocatalysis

High surface area carbon aerogel monoliths with hierarchical porosity

Preparation of Cresol–formaldehyde Carbon Aerogels Via Drying Aquagel at Ambient Pressure

Fabrication and Nano-Structure Control of Carbon Aerogels Via a Microemulsion-Templated Sol–gel Polymerization Method

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Strong and machinable carbon aerogel monoliths with low thermal conductivity prepared via ambient pressure drying

Preparation of Carbon Aerogels by Conventional Drying and Their Control in Microstructure

Preparation and Application of Carbon Aerogels

PREPARATION OF MONOLITHIC CARBON AEROGELS FROM M-CRESOL WITH FOEMALDEHYDE THROUGH SOL-GEL PROCESS