Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

The preparation of carbon aerogels based upon the gelation of resorcinol–furfural in isopropanol with organic base catalyst

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Preparation and Microstructure Control of Carbon Aerogels Produced Using M-Cresol Mediated Sol-Gel Polymerization of Phenol and Furfural

On Porosity of Carbon Aerogels from Sol-Gel Polymerization of Phenolic Novolak and Furfural

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Synthesis of ultrahigh-pore-volume carbon aerogels through a “reinforced-concrete” modified sol–gel process

Synthesis and characterization of phenolic-furfural based carbon aerogels

Carbon aerogels in the form of microspheres and their potential application in CO2 adsorption: A thermodynamic and kinetic study

Synthesis and Structure of Carbon/Silica Hybrid Aerogels

Synthesis and Characterization of Ni-Doped Carbon Aerogels

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

MICROSTRUCTURE EVOLUTION IN THE PREPARATION OF CARBON AEROGELS BY SMALL ANGLE X-RAY SCATTERING

Molecular design of polymer precursors for controlling microstructure of organic and carbon aerogels

Effect of hydrophobic group in polymer matrix on porosity of organic and carbon aerogels from sol–gel polymerization of phenolic resole and methylolated melamine

Effect of Hydrophilic Groups in the Polymer Matrix on the Porosity of Organic and Carbon Aerogels Produced from Melamine, Phenolic Resole and Formaldehyde

Chemical Foaming Coupled Self-Etching: A Multiscale Processing Strategy for Ultrahigh-Surface-Area Carbon Aerogels.

Lithium perrhenate catalyst for carbon aerogel-based supercapacitor

Ferrocene Introduced into 5-Methylresorcinol-Based Organic Aerogels

Effect of concentration of reactants on porosity of hydrogels, organic and carbon aerogels

Preparation and characterization of phenol-melamine-formaldehyde aerogels

Morphology controlled carbon aerogel with enhanced thermal insulation and mechanical properties: a simple route for the regulated synthesis