Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Ferrocene Introduced into 5-Methylresorcinol-Based Organic Aerogels

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Hydrosilylation of ferrocene-containing alkenes and alkynes as a route to siloxane aerogels modified with ferrocene

Synthesis and characterization of phenolic-furfural based carbon aerogels

On Porosity of Carbon Aerogels from Sol-Gel Polymerization of Phenolic Novolak and Furfural

Self-Assembled Nano-Fe3C Embedded in Reduced Graphene Oxide Aerogel with Efficient Fenton-Like Catalysis

Synthesis and Structure of Carbon/Silica Hybrid Aerogels

Chemical Foaming Coupled Self-Etching: A Multiscale Processing Strategy for Ultrahigh-Surface-Area Carbon Aerogels.

Carbon aerogels in the form of microspheres and their potential application in CO2 adsorption: A thermodynamic and kinetic study

Effect of Oxidation of Phenolic–furfural Aerogels on Pore Structures of Carbon Aerogels

Synthesis of Ferrocene‐Containing Schiff Bases Based on 3‐Aminopropyltriethoxysilane Oligomers for Covalent Modification of Glass Surfaces and Creation of Soft Magnetic Materials

Synthesis Of A New Organic Aerogel

Synthesis of ultrahigh-pore-volume carbon aerogels through a “reinforced-concrete” modified sol–gel process

A novel low-molecular-mass gelator with a redox active ferrocenyl group: tuning gel formation by oxidation

Preparation and Characterization of Organic-Inorganic Hybrid ZrOC/PF Aerogel Used As High-Temperature Insulator

Preparation and characterization of lignin-derived carbon aerogels

Superelastic Cobalt Silicate@Resorcinol Formaldehyde Resin Core-Shell Nanobelt Aerogel Monoliths with Outstanding Fire Retardant and Thermal Insulating Capability

Silica aerogels with tailored chemical functionality

Self-catalyzed Gelling Synthesis of Aerogels with Inorganic and Organic Nanocomponents for Thermal Insulation and CO 2 Capture

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process