Abstract:The properties of silica aerogels, and the ability to prepare them by ambient pressure drying, hinge on their chemical surface modification. Until now, quantitative analysis of the surface chemistry has not been possible by state-of-the-art analytical methods. Here, we determine the surface chemistry of six archetypal, ambient pressure dried, hydrophobic silica aerogels and open-porous foams with quantitative 1H, 13C, and 29Si and 1H–29Si heteronuclear solid-state NMR spectroscopy. The quality of the external calibration, the validation by elemental analysis, and the consistency among the 1H, 13C, and 29Si MAS NMR data enable us to robustly quantify the surface chemistry of these classical silica materials. Four aerogels were derived from tetraethoxysilane (TEOS), polyethoxydisiloxane (PEDS), or waterglass precursors and hydrophobized with trimethylsilyl (TMS) groups through immersion in hexamethyldisilazane (HMDZ) in heptane, trimethylchlorosilane (TMCS) in heptane, or hexamethyldisiloxane (HMDSO) in ethanol. The resulting aerogels display remarkably similar chemistries despite their very different precursors (alkoxides, waterglass), hydrophobization agents (HMDZ, TMCS, HMDSO), and gelation and hydrophobization solvents (water, ethanol, heptane). The TMS content is nearly the same (22–27 wt %), the ethoxy content is low (<4 wt %), and the silica speciation displays a narrow range for all four aerogels. The 1H–29Si heteronuclear correlation spectra provide unambiguous evidence for the grafting of the TMS groups on the silica surfaces. Remarkably, the NMR data enable the prediction of the silica particle size to within 1 to 2 nm of that derived by TEM analysis. Two additional, inherently hydrophobic, ambient pressure dried, open-porous silica foams were synthesized from methyltrimethoxysilane (MTMS) and from a MTMS–dimethyldimethoxysilane (DMDMS) mixture. The reduction in the number of bridging oxygens per Si atom, from 3.76 to 3.90 for TEOS, PEDS, or waterglass based aerogels, to 2.86 for the MTMS based open-porous foam, and to 2.48 for the MTMS–DMDMS derived open-porous foam, results in a brittle-to-superflexible transition. Our results highlight the importance of the chemical treatment of the wet gels (hydrophobization and solvent exchange) on the final surface chemistry of silica aerogels.

Silica aerogels with tailored chemical functionality

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Preparation and Surface Modification Mechanism of Silica Aerogels Via Ambient Pressure Drying

Surface Chemistry of Hydrophobic Silica Aerogels

Preparation of Silica Aerogels by Non-Supercritical Drying

Preparation and Characterization of Silica Aerogels Derived from Ambient Pressure

An Overview on Silica Aerogels Synthesized by Siloxane Co-precursors

Surface Modification and Properties of SiO2 Nano Porous Aerogels

Silica Aerogels Having High Flexibility and Hydrophobicity Prepared by Sol-Gel Method

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Synthesis of Silica Aerogel Monoliths with Controlled Specific Surface Areas and Pore Sizes

Surface Modification and Adsorption Properties of SiO2 Nanoporous Aerogels

Hierarchically porous and highly transparent polymethylsilsesquioxane aerogels with an ultrahigh specific surface area using an organic alkali as a catalyst, surfactant, and template

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

Fast and One-Pot Synthesis of Silica Aerogels Via A Quasi-Solvent-Exchange-Free Ambient Pressure Drying Process

Ambient Pressure Preparation,Surface Structure and Adsorption Properties of Silica Aerogels

Resilient Silica-Based Aerogels with Organic and Inorganic Molecular Hybrid Structure Prepared by a Novel Self-Catalyzed Gelling Strategy for Efficient Heat Insulation and CO2 Adsorption

A Novel Route for Preparation of Transparent and Superhydrophobic Silica Aerogels

STRUCTURE AND PROPERTIES OF MONOLITHIC SILICA AEROGELS BY METHYLTRIMETHOXYSILANE