Abstract:A low-density, high-specific surface area, high-strength and large-sized carbon aerogel preparation process is a key technology in the industrial application of aerogel science. In recent years, ingenious nanostructure design, along with salt templates, drying optimization and other strategies have been applied by numerous scientists. As a result, the specific surface area of carbon aerogel has significantly increased and the density reduced. However, the preparation of high-strength and large-sized intact carbon aerogel at low cost is still a challenge due to the limitations of thermal treatment equipment and drying process. In this study, we propose an improved preparation method of ambient pressure solvothermal polymerization and auxiliary ambient pressure drying by the principle of acid–base two-step catalysis using resorcinol and furfural as raw materials. Resultantly, the condensation and cross-linking reaction process is stabilized by the ambient pressure solvothermal polymerization, which effectively reinforces the interfacial bonding between primary particles and forms a high-strength skeleton. The breaking strength of the aerogels reach up to 9.74 MPa. The auxiliary ambient pressure drying can greatly reduce the drying shrinkage and density of the aerogel and solve the problems of drying deformation and cracking of large-sized carbon aerogel. The drying shrinkage and density of the obtained carbon aerogels are reduced to 3.22% and 0.203 g/cm 3 , respectively, and the specific surface area reaches 675.057 m 2 /g. Moreover, the large-sized sample (70 mm (d) × 25 mm (h)) can also be prepared by this method since the strength of skeleton can resist the capillary force of pore structure, and the nanoporous architecture can be perfectly retained. Therefore, this study provides a new preparation scheme for the industrial large-scale production and application of carbon aerogel.

Synthesis of Monolithic Carbon Aerogels with High Mechanical Strength Via Ambient Pressure Drying Without Solvent Exchange

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

Strong and machinable carbon aerogel monoliths with low thermal conductivity prepared via ambient pressure drying

Carbon Aerogel Films Synthesized at Ambient Conditions

Mechanical Properties of Novel Carbon Aerogels with Nanoscale Skeleton Derived from Resorcinol/Formaldehyde/Acetonitrile Sol-Gel System

Synthesis of ultrahigh-pore-volume carbon aerogels through a “reinforced-concrete” modified sol–gel process

Preparation of Monolithic Carbon Aerogels and Investigation of Their Pore Interconnectivity by a Nanocasting Pathway

Preparation of Cresol–formaldehyde Carbon Aerogels Via Drying Aquagel at Ambient Pressure

Synthesis of Structure Controllable Carbon Aerogel with Low Drying Shrinkage and Scalable Size As High-Temperature Thermal Insulator

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Graphitic Crystallite Nanomaterials Enable the Simple and Ultrafast Synthesis of Resorcinol-Formaldehyde Carbon Aerogel Monoliths

Graphene-templated Carbon Aerogels Combining with Ultra-High Electrical Conductivity and Ultra-Low Thermal Conductivity

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Synthesis of carbon aerogels with controlled morphology and pore structure to modulate their bulk density and thermal conductivity via a quick one-pot preparation strategy

Synthesis of Environmentally Friendly Nanoporous Monolithic Carbon Aerogels Via Ambient Pressure Drying for High-Temperature Thermal Insulators

Preparation of Carbon Aerogels by Conventional Drying and Their Control in Microstructure

Preparation of Low-Density Carbon Aerogels by Ambient Pressure Drying

Synthesis of monolithic SiC aerogels with high mechanical strength and low thermal conductivity

Preparation of Carbon Aerogels at Room Temperature Using Acetonitrile As Solvent