Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Hierarchically Porous Carbon Aerogels with High Specific Surface Area Prepared from Ionic Liquids Via Salt Templating Method

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Chemical Foaming Coupled Self-Etching: A Multiscale Processing Strategy for Ultrahigh-Surface-Area Carbon Aerogels.

A scalable molecular-templating strategy toward well-defined microporous carbon aerogels for efficient water treatment and electrocatalysis

Carbon Nanotube Spaced Graphene Aerogels with Enhanced Capacitance in Aqueous and Ionic Liquid Electrolytes

A Facile Alkali-Assisted Synthesis Strategy for Hierarchical Porous Carbon Aerogels for Supercapacitors

High surface area carbon aerogel monoliths with hierarchical porosity

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Preparation of monolithic titania aerogels with high surface area by a sol–gel process combined surface modification

Fabrication of novel powdery carbon aerogels with high surface areas for superior energy storage

3D Carbon Microspheres with a Maze-Like Structure and Large Mesopore Tunnels Built From Rapid Aerosol-Confined Coherent Salt/Surfactant Templating

Porous carbons originated from gelatin through molten salt templating in conjunction with chemical activation for ultracapacitors

Density controlled oil uptake and beyond: from carbon nanotubes to graphene nanoribbon aerogels

Nanocellulose-based aerogels with devisable structure and tunable properties via ice-template induced self-assembly

Self-catalyzed Gelling Synthesis of Aerogels with Inorganic and Organic Nanocomponents for Thermal Insulation and CO 2 Capture

Hierarchical Porous Carbon Aerogel Derived from Sodium Alginate for High Performance Electrochemical Capacitor Electrode

Synthesis of carbon aerogels with controlled morphology and pore structure to modulate their bulk density and thermal conductivity via a quick one-pot preparation strategy

Morphology controlled carbon aerogel with enhanced thermal insulation and mechanical properties: a simple route for the regulated synthesis