Abstract:Compact transportable generators are required for simulating a lightning current pulse for electrical apparatus testing. A bi-exponential current pulse has to be formed by such a generator (with a current rise time of about two orders of magnitude faster than the damping time). The objective of this study was to develop and investigate a compact pulse generator with intermediate inductive storage and a fuse opening switch as a simulator of lightning discharge. A Marx generator (six stages) with a capacitance of 1 μF and an output voltage of 240 kV was employed as primary storage. In each of the stages, two IK-50/3 (50 kV, 3 μF) capacitors are connected in parallel. The generator inductance is 2 μH. A test bed for the investigations was assembled with this generator. The generator operates without SF6 and without oil in atmospheric air, which is very important in practice. Straight copper wires with adjustable lengths and diameters were used for the electro-explosive opening switch. Tests were made with active-inductive loads (up to 0.1 Ω and up to 6.3 μH). The current rise time is lower than 1200 ns, and the damping time can be varied from 35 to 125 μs, following the definition of standard lightning current pulse in the IEC standard. Moreover, 1D MHD calculations of the fuse explosion were carried out self-consistently with the electric circuit equations, in order to calculate more accurately the load pulse parameters. The calculations agree fairly well with the tests. On the basis of the obtained results, the design of a transportable generator was developed for a lightning simulator with current of 50 kA and a pulse shape corresponding to the IEEE standard.

Improved Testing Method of 10/350 Μs Impulse Current Tests

Impulse Current Generator With Dual Waveform Output and Its Application

Modeling of Pulse Generator in Electrical Fast Transient/Burst Test

Design of a High Efficiency 10/350 Μs Impulse Current Generator

An Integrated Testbed with Single DC Source for Delivering Symmetrical Square-Wave Excitation Voltage in the Triple Pulse Test.

New Method To Model The Equivalent Circuit Of The Pulse Generator In Electrical Fast Transient/Burst Test

An improved designing method of metal oxide arrester impulse test circuit parameter

Switching Impulse Generator Based on IGBT Triggering Control and Transformer Induction

Simulation on Dynamic Characteristics of MOV Under 8/20 μs Impulse Current Generators with Different Source Impedances

Current Interruption Tests of HVDC Circuit‐breakers: Requirements, Methods and a Testing Case

The Simulation Study of Transformer Inductive Oscillating Switching Impulse Voltage Generation

Design of Multi-Component Impulse Current Generator for Practical Lightning Current Simulation

Method of Impulse Test for GIS with Docking Way and Impulse Waveform Analysis

Generation Oscillating Switching Impulse Using Power Transformer

A Novel Crowbar Impulse Current Circuit for Testing the Switch-Type SPD

Equivalent testing methods for shielding of heavy protective current transformers

A New Method to Evaluate the Effectiveness of Impulse Voltage for Detecting Insulation Defects in GIS Equipment

The Study of Oscillating Lightning Impulse Voltage Generator for a 110kv GIS Field Test

Pulse generator with intermediate inductive storage as a lightning simulator

A Fully Enclosed, Compact Standard Lightning Impulse Generator For Testing Ultra-High-Voltage-Class Gas-Insulated Switchgears With High Capacitance

Testing of High Current Transformer by Non-Uniform Equivalent Magnetomotive Force Method