Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Pulse generator with intermediate inductive storage as a lightning simulator

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

A Current-Pulse Generator with an Intermediate Storage for Inductive-Resistive Load Operation

500Kv Compact Repetitive Marx Generator

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

A 700 kV pulse generator with a rise time on the order of several nanoseconds

Compact Pulse Generator with Sub-Nanosecond Rise Time Based on Inductance of Order of Several Nh.

Design and Simulation of a Compact Sub-Nanosecond Pulse Generator Based on Marx's Circuit Theory of Field-Effect Transistors

Design of Multi-Component Impulse Current Generator for Practical Lightning Current Simulation

A Fully Enclosed, Compact Standard Lightning Impulse Generator For Testing Ultra-High-Voltage-Class Gas-Insulated Switchgears With High Capacitance

Design of a 500 kV pulse generator with the rise time of nanosecond level

A Compact High Voltage Pulse Generator for Bounded-wave EMP Simulator

Solid-state Marx generator based on saturable pulse transformer and fast recovery diodes

Development of 600 Kv Adjustable Fast Rising High Voltage Pulse Generator

A Long-Pulse Generator Based on Tesla Transformer and Pulse-Forming Network

Impulse Current Generator With Dual Waveform Output and Its Application

Design and Performance of a Compact Marx Generator for Two-Electrode Gas Switch Used in ICF Power Conditioning System