Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

A Long-Pulse Generator Based on Tesla Transformer and Pulse-Forming Network

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

A Repetitive Pulser with Four Spark Gap Switches

Novel Multiple-switch Pulsed Power Technologies

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Transmission Line Transformers for Up to 100 Kw Pulsed Power Generation

A 10 Kw High-Voltage Pulse Generator for Corona Plasma Generation

Investigation on a Novel Multiple-Switch Pulsed Power Technology

A Novel Circuit Topology for Pulsed Power Generation

A Tesla Pulse Transformer for Spiral Water Pulse Forming Line Charging

Design and Characteristics of a High-Power Pulse Transformer Based on a Closed Cage Core Structure

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Design and Simulation of a Compact Sub-Nanosecond Pulse Generator Based on Marx's Circuit Theory of Field-Effect Transistors

An All Solid-State High-Voltage Rectangular Pulse Generator

Design and performance of a pulse transformer based on Fe-based nanocrystalline core

500Kv Compact Repetitive Marx Generator

A 700 kV pulse generator with a rise time on the order of several nanoseconds