Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Design of a High Efficiency 10/350 Μs Impulse Current Generator

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A Current-Pulse Generator with an Intermediate Storage for Inductive-Resistive Load Operation

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

Improved Testing Method of 10/350 Μs Impulse Current Tests

100 kV, 10 pps repetitive impulse current generator

Impulse Current Generator With Dual Waveform Output and Its Application

Development of a Pulsed Power Supply with Tens of Milliseconds Flattop Time.

Study on the Impulse Current for Non-linear Resistances

Pulse generator with intermediate inductive storage as a lightning simulator

Conceptual Design and Comparison for 100-Kj Inductive Pulse Power Supplies

Design and Simulation of a Compact Sub-Nanosecond Pulse Generator Based on Marx's Circuit Theory of Field-Effect Transistors

Design of a 3 kA Compact Pulse Generator for The Pulsed Current Injection Test

Energy regulation of impulse current generator modulated DC arc discharge

Compact Pulse Generator with Sub-Nanosecond Rise Time Based on Inductance of Order of Several Nh.

A High Voltage Pulse Generator Based on Silicon-Controlled Rectifier for Field-Reversed Configuration Experiment

Design and Construction of a Compact Portable Pulsed Power Generator

Development on Rogowski Coil for Measuring 10/350 Μs Direct Lightning Current

An Improved Method to Design Surge Generators

Research for High-Voltage Nanosecond Rectangular Pulse Generator