Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Electronic Current Transformer with Non-magnetic Air Gap in Core

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics

An Analytical Model of Air-Gap-Core Current Transformer Considering Loading Effect

New Study on the Principle of Air Gapped Core Current Transformer

Research on Medium-voltage Electronic Transformers

Design and Simulation of a New Model for Air‐gapped Current Transformers

The Kind of Electronic Current Transformer for Measuring the Current Through Ground Resistance of Power Transformer

Double Air-gap Current Transformer Applied to High Voltage Transmission Line On-site Mobile Comparison System

Design of double-loop current transformer based on magnetic field incomplete cancellation

Design and realization of an electronic current transformer applied in GIS

The Development and Performance of Dual-Core DC Tolerant Current Transformer

Modeling and Transfer Characteristics Simulation Analysis of Electronic Current Transformers

Electronic Current Transformer Based on Low-power Current Transformer

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Introduction of an intriguing approach for eletric current transformer on-site examining repairing

Study on Output Characteristics of Electronic Current Transformer in Complex Electromagnetic Environment

A high accuracy current comparator with electronic compensation

Study on Novel Air-Core Transformer Type SCFCL with a Trigger Winding

Real-Time Detection Method for Saturation Speed of Air-Core Coil Current Transformer

Study of Nonlinear Excitation Circuits for Fluxgate Magnetometer

Iron Core Nonlinearities of Power Transformer