Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

22nm silicon nanowire gas sensor fabricated by trilayer nanoimprint and wet etching

Silicon nanowire sensor for gas detection fabricated by nanoimprint on SU8/SiO2/PMMA trilayer

Trilayer nanoimprint fabrication and simulation of the silicon nanowire sensor for gas detection

Silicon nanowires by combined nanoimprint and angle deposition for gas sensing applications

Conductive polymer nanowire gas sensor fabricated by nanoscale soft lithography

A vertical tip-tip contact silicon nanowire array for gas sensing

Growth of carbon nanowalls at atmospheric pressure for one-step gas sensor fabrication

Preparation of In_2O_3 Nanwires by Sol-gel Template Technology and Their Gas Sensing Property

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

ZnO Nanorod/porous Silicon Nanowire Hybrid Structures As Highly-Sensitive NO2 Gas Sensors at Room Temperature

Branching TiO2 Nanowire Arrays for Enhanced Ethanol Sensing

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Large-area alignment of tungsten oxide nanowires over flat and patterned substrates for room-temperature gas sensing

Wafer-level fabricated high-performance micro/nano gas sensor

Gas Sensors Based on Semiconducting Nanowire Field-Effect Transistors

Gas sensors based on semiconducting nanowire field-effect transistors.

Highly enhanced response of MoS2/porous silicon nanowire heterojunctions to NO2 at room temperature

Fabrication of Silicon Nanowire Devices for Ultrasensitive, Label-Free, Real-Time Detection of Biological and Chemical Species.

The Electrostatically Formed Nanowire: A Novel Platform for Gas-Sensing Applications