Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Preparation of In_2O_3 Nanwires by Sol-gel Template Technology and Their Gas Sensing Property

In(OH)3particles from an Ionic Liquid Precursor and Their Conversion to Porous In2O3particles for Enhanced Gas Sensing Properties

The fabrication of In2O3 nanowire and nanotube by single nozzle electrospinning and their gas sensing property

Low-Temperature As-Doped In 2 O 3 Nanowires for Room Temperature NO 2 Gas Sensing

Porous Indium Oxide Nanotubes: Layer-by-Layer Assembly on Carbon-Nanotube Templates and Application for Room-Temperature NH3 Gas Sensors

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Controllable Biomolecule-Assisted Synthesis and Gas Sensing Properties of in 2 O 3 Micro/nanostructures with Double Phases

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Fabrication, Characterization and Performance of Low Power Gas Sensors Based on (GaxIn1-x)2O3 Nanowires

Ionic liquid-assisted synthesis of In2O3 nanoparticles for ppb-level NO2 sensing at low temperature

Synthesis and Enhanced Gas-Sensing Properties of Ultralong Nio Nanowires Assembled with Nio Nanocrystals

n-n type In2O3@-WO3 heterojunction nanowires: enhanced NO2 gas sensing characteristics for environmental monitoring

NO<sub>2</sub> Gas Sensing Characters of Polycrystaline ZnO Nanorods

NO2 gas sensing properties of amorphous InGaZnO4 submicron-tubes prepared by polymeric fiber templating route

Preparation and morphology controlling of Co3O4 nanostructures and their gas-sensing properties

Highly Sensitive Room-Temperature Co Gas Sensors: Pt and Pd Nanoparticle-Decorated In2o3 Flower-Like Nanobundles

Nanowires-assembled WO3 nanomesh for fast detection of ppb-level NO2 at low temperature

Templating Synthesis of Sno2 Nanotubes Loaded with Ag2o Nanoparticles and Their Enhanced Gas Sensing Properties

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

Pristine and Ag decorated In2O3 (110): A gas-sensitive material to selective detect NO2 based on DFT study