Abstract:The role of microstructure and doping on the mechanical strength of microscale tension specimens of columnar grain and laminated polysilicon doped with different concentrations of phosphorus was investigated. The average tensile strengths of undoped columnar and laminated polysilicon specimens were 1.3 ± 0.1 and 2.45 ± 0.3 GPa, respectively. Heavy doping reduced the strength of columnar polysilicon specimens to 0.9 ± 0.1 GPa. On grounds of Weibull statistics, the experimental results from specimens with gauge sections of 1000 $\mu \text{m}\times 100~\mu \text{m}\times 1~\mu \text{m}$ predicted quite well the tensile strength of specimens with gauge sections of 150 $\mu \text{m}\times 3.75~\mu \text{m}\times 1~\mu \text{m}$ , and vice versa. The large difference in the mechanical strength between columnar and laminated polysilicon specimens was due to sidewall flaws in columnar polysilicon, which were introduced during reactive ion etching (RIE) and were further exacerbated by phosphorus doping. Removal of the large defect regions at the sidewalls of columnar polysilicon specimens via ion milling increased their tensile strength by 70%–100%, approaching the strength of laminated polysilicon, which implies that the two types of polysilicon films have comparable tensile strength. Measurements of the effective mode I critical stress intensity factor, $K _{\mathbf {IC,eff}}$ , also showed that all types of polysilicon films had comparable resistance to fracture. Therefore, additional processing steps to eliminate the edge flaws in RIE patterned devices could result in significantly stronger microelectromechanical system components fabricated by conventional columnar polysilicon films. [2014-0269]

Piezoresistive Properties of Heavily Doped P-type Polysilicon Films

Comparison on Mechanical Properties of Heavily Phosphorus- and Arsenic-Doped Czochralski Silicon Wafers

Effects of Heavy Phosphorus-Doping on Mechanical Properties of Czochralski Silicon

Role of Microstructure and Doping on the Mechanical Strength and Toughness of Polysilicon Thin Films

Study On Polysilicon Resistivity Control With Nano-Scale Grain Size

Nanoscale Insight Of High Piezoelectricity In High-T-C Pmn-Ph-Pt Ceramics

Variations of High-Pressure Thermoelectric and Mechanical Properties of Si Single Crystals under Doping with N and P–T Pre-Treatment

Doping Effects in Co-deposited Mixed Phase Films of Hydrogenated Amorphous Silicon Containing Nanocrystalline Inclusions

Experimental Investigation of Piezoresistive Effect in P-Type 4H–sic

Giant piezoresistance of p-type nano-thick silicon induced by interface electron trapping instead of 2D quantum confinement

Fabrication of Silicon Highly-Rich SiO<inf>x</inf>(x&#x003C;0.75) and Its Novel Resistive Switching Behaviors

Characterization of Heavily Doped Polysilicon Films for Cmos-Mems Thermoelectric Power Generators

The Study of Reactive Ion Etching of Heavily Doped Polysilicon Based on HBr/O2/He Plasmas for Thermopile Devices

Influence of Boron-doping on Electrical Properties of Na-Si:H Thin Film Prepared by PECVD

Nonlinear piezoresistive effect of 4H–SiC for applications of high temperature pressure sensors

Conjugated Polymer Films for Piezoresistive Stress Sensing

Structure and electrical properties of polysilicon films doped with ammonium tetraborate tetrahydrate

Highly sensitive hybrid silicon carbonitride piezoresistive sensors enabled by coupling piezoelectric effect

Characterizing piezoelectric properties of PVDF film under extreme loadings

Design of SiC-Doped Piezoresistive Pressure Sensor for High-Temperature Applications

The Piezoresistance of a Device with Polyphenylenevinylene Derivative PSS-PPV Film