Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

Spiral Capacitor Based on Copper Electroplating

RF Inductors with Suspended and Copper Coated Thick Crystalline Silicon Spirals for Monolithic MEMS LC Circuits

Combination of MEMS Processing and Electroless Copper Plating for a Novel RF Inductor

Fabrication and performance of a novel suspended RF spiral inductor

Design, Fabrication and Characterization of TSV Interposer Integrated 3D Capacitor for SIP Applications

3D HfO<sub>2</sub> Thin Film MEMS Capacitor with Superior Energy Storage Properties

Micro-Machined Variable RF Capacitor Based on Glass Substrate

Superconducting Membrane Mechanical Oscillator Based on Vacuum-Gap Capacitor

A Novel MEMS Double-Layer Spiral Inductor with High Current-Carrying Capacity

Spiral Graphene Coupling Hierarchically Porous Carbon Advances Dual-Carbon Lithium Ion Capacitor

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

Partially Filled TGV Based on Double Sides Cu Conformal Electroplating Process for MEMS Vacuum Packaging

Fabrication of High-Performance On-Chip Suspended Spiral Inductors by Micromachining and Electroless Copper Plating

Fabrication and Characteristics of Aluminum Oxide MIM Capacitors with Interconnections Using BCB-based MEMs Technology

Design and fabrication of X-band capacitive MEMS switches

High-Performance MIM Capacitors for a Secondary Power Supply Application

MEMS based digital variable capacitors with a high-k dielectric insulator

A novel design of super-capcitor based on black silicon with atomic layer deposition

Fabrication Of Cu-Based Carbon Nanofiber Composite Film Applied In Mems Contactor

Fabrication and Electrical Properties of Flexible Polymer-based MIM Capacitors of High-k Nanolaminate Dielectrics of HfO2-SnO2-TiO2 with ultrathin Al2O3 insertion layer by Plasma-Enhanced Atomic Layer Deposition

Fabrication of a Tunable Capacitor with a Non-Planar Plate by Using Titanium and Polyimide As Sacrificial Layers