Abstract:Enabling fast charging in lithium-ion batteries (LIBs) is critical for electric vehicle development, the U.S. goal being to charge to 80% of full capacity in 15 minutes [1]. This is a challenge due to significant capacity fade occurring at charge rates of 6C (charge in 60/6 = 10 minutes) and above. Fast charge rates induce irreversible lithium (Li) plating that adversely impacts battery performance and safety. External stack pressure can improve electrical contact and minimize delamination; further, an understanding of the impact of pressure on capacity fade can provide insight into the degradation mechanisms [2,3]. In this work, we investigate the extreme fast charging (XFC) regime, focusing on cell degradation and parasitic Li plating using single-layer pouch cells with graphite anodes, LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes, and 1.2 M LiPF6 in 3:7 weight % ethylene carbonate and diethyl carbonate (Gen2 electrolyte). To study the effect of pressure, electrode thickness and material capacity were varied. Cells were cycled under set uniform stack pressure configurations at 6C up to 140 times and tested between 10 – 150 psi. We have characterized fast charging cells under uniform pressure with spatially resolved operando X-ray diffraction (XRD) from high energy, high flux synchrotron radiation to study Li plating, parasitic reactions, and Li intercalation into graphite. Through spatially resolved operando XRD, we have mapped the intensity of Li x C 6 and Li metal peaks across the electrode to correlate peak intensity as a function of pressure and electrode thickness. This was complemented with ex situ X-ray photoelectron spectroscopy to study the composition of parasitic reaction products, corrosion and to correlate heterogeneity and local Li plating. Our results show an improvement in battery performance with increased uniform pressure. A reduction in Li plating was observed at elevated uniform pressures and Li plating appears more prevalent on the thicker electrodes. We believe that at increased pressure the reduced capacity fade arises from improved wettability, where the electrolyte acts as a lubricant increasing active sights, and a reduction in polarization across the thickness of the electrode leading to more homogenous reaction conditions. We emphasize the importance of electrode stack pressure in XFC batteries by quantifying the degradation mechanisms that cause capacity fade to enable better battery engineering. References USABC Goals – Lithium Electrode Based Cell and Manufacturing for Automotive Traction Applications, USABC (United States Advanced Battery Consortium), http://www.uscar.org/guest/article_view.php?articles_id=85 C. Cao et al. J. Electrochem. Soc. 129, 040540 (2022). J. Cannarella and C. B. Arnold, J. Power Source, 245, 745-751 (2014).

Effects of stack pressure on the equivalent circuit model of lithium-ion batteries

A stack pressure based equivalent mechanical model of lithium-ion pouch batteries

How Does Stacking Pressure Affect the Performance of Solid Electrolytes and All‐Solid‐State Lithium Metal Batteries?

The effect of volume change and stack pressure on solid‐state battery cathodes

Enhancing electrochemomechanics: How stack pressure regulation affects all-solid-state batteries

Interrogating the Role of Stack Pressure in Transport‐Reaction Interaction in the Solid‐State Battery Cathode

Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks

Understanding the Effect of Cycling Lithium-Ion Pouch Cells under Stress Using Neutron Diffraction

Understanding the Effects of Uniform Stack Pressure in Extreme Fast Charging Lithium-Ion Batteries Via Operando X-Ray Diffraction

Comparative Study of Equivalent Circuit Models Performance in Four Common Lithium-Ion Batteries: LFP, NMC, LMO, NCA

In Situ NMR Verification for Stacking Pressure‐Induced Lithium Deposition and Dead Lithium in Anode‐Free Lithium Metal Batteries

A comprehensive equivalent circuit model for lithium-ion batteries, incorporating the effects of state of health, state of charge, and temperature on model parameters

Effects of external pressure on cycling performance of silicon-based lithium-ion battery: modelling and experimental validation

The Stack Pressure Dilemma in Sulfide Electrolyte Based Li Metal Solid‐State Batteries: A Case Study with Li6PS5Cl Solid Electrolyte

Stack Pressure Considerations for Room Temperature All-Solid-State Lithium Metal Batteries

Operando Stack Pressure Measurement of LFP/Graphite and LMFP/Graphite Cells to aid in State of Charge Prediction

Lithium Ion Batteries—Development of Advanced Electrical Equivalent Circuit Models for Nickel Manganese Cobalt Lithium-Ion

Effect of Uniaxial Stack Pressure on the Performance of Nanocrystalline Electrolytes and Electrode Composites for All-Solid-State Fluoride-Ion-Batteries

Multiphysics modeling of the influence of initial pressure on mechanical and electrochemical performance of all-solid-state batteries

Influence of connecting plate resistance upon LiFePO4 battery performance

An electromechanical coupling model-based state of charge estimation method for lithium-ion pouch battery modules