Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Understanding the Effect of Cycling Lithium-Ion Pouch Cells under Stress Using Neutron Diffraction

(Invited) Understanding the Coupled Electrochemical-Mechanical Behavior of Materials for Improving the Performance and Durability of Lithium-Ion Batteries

Visualizing the Chemistry and Structure Dynamics in Lithium-Ion Batteries by In-Situ Neutron Diffraction

In-situ Observation of Inhomogeneous Degradation in Large Format Li-ion Cells by Neutron Diffraction

Insights into the Swelling Force in Commercial LiFePO4 Prismatic Cell

Unravelling the Impact of Reaction Paths on Mechanical Degradation of Intercalation Cathodes for Lithium-Ion Batteries.

Effect of external pressure and internal stress on battery performance and lifespan

Uncovering the Degradation Mechanism Induced by Ion-Diffusion Kinetics in Large-Format Lithium-Ion Pouch Cells

Unveiling the migration behavior of lithium ions in NCM/Graphite full cell via in operando neutron diffraction

(Invited) Study of Lithium-Ion Cell Degradation Behavior under Multiple Stresses

Low-Temperature Aging Effect on Safety of Lithium-Ion Batteries Subjected to Intrusion: A Comparative Study of 18650 and Pouch Cells

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

The effect of volume change and stack pressure on solid‐state battery cathodes

Intergranular Cracking As a Major Cause of Long-Term Capacity Fading of Layered Cathodes.

Bridging the Gap Between Pouch and Coin Cell Electrochemical Performance in Lithium Metal Batteries

Effects of external pressure on cycling performance of silicon-based lithium-ion battery: modelling and experimental validation

Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries

External Pressure Affecting Dendrite Growth and Dissolution in Lithium Metal Batteries During Cycles

A numerical study of mechanical degradation of Carbon-Coated Graphite Active Particles in Li-ion battery anodes

Swelling, pressure evolution and aging in high-silicon/ graphite composite lithium-ion batteries