Abstract:Enabling fast charging in lithium-ion batteries (LIBs) is critical for electric vehicle development, the U.S. goal being to charge to 80% of full capacity in 15 minutes [1]. This is a challenge due to significant capacity fade occurring at charge rates of 6C (charge in 60/6 = 10 minutes) and above. Fast charge rates induce irreversible lithium (Li) plating that adversely impacts battery performance and safety. External stack pressure can improve electrical contact and minimize delamination; further, an understanding of the impact of pressure on capacity fade can provide insight into the degradation mechanisms [2,3]. In this work, we investigate the extreme fast charging (XFC) regime, focusing on cell degradation and parasitic Li plating using single-layer pouch cells with graphite anodes, LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes, and 1.2 M LiPF6 in 3:7 weight % ethylene carbonate and diethyl carbonate (Gen2 electrolyte). To study the effect of pressure, electrode thickness and material capacity were varied. Cells were cycled under set uniform stack pressure configurations at 6C up to 140 times and tested between 10 – 150 psi. We have characterized fast charging cells under uniform pressure with spatially resolved operando X-ray diffraction (XRD) from high energy, high flux synchrotron radiation to study Li plating, parasitic reactions, and Li intercalation into graphite. Through spatially resolved operando XRD, we have mapped the intensity of Li x C 6 and Li metal peaks across the electrode to correlate peak intensity as a function of pressure and electrode thickness. This was complemented with ex situ X-ray photoelectron spectroscopy to study the composition of parasitic reaction products, corrosion and to correlate heterogeneity and local Li plating. Our results show an improvement in battery performance with increased uniform pressure. A reduction in Li plating was observed at elevated uniform pressures and Li plating appears more prevalent on the thicker electrodes. We believe that at increased pressure the reduced capacity fade arises from improved wettability, where the electrolyte acts as a lubricant increasing active sights, and a reduction in polarization across the thickness of the electrode leading to more homogenous reaction conditions. We emphasize the importance of electrode stack pressure in XFC batteries by quantifying the degradation mechanisms that cause capacity fade to enable better battery engineering. References USABC Goals – Lithium Electrode Based Cell and Manufacturing for Automotive Traction Applications, USABC (United States Advanced Battery Consortium), http://www.uscar.org/guest/article_view.php?articles_id=85 C. Cao et al. J. Electrochem. Soc. 129, 040540 (2022). J. Cannarella and C. B. Arnold, J. Power Source, 245, 745-751 (2014).

Operando Stack Pressure Measurement of LFP/Graphite and LMFP/Graphite Cells to aid in State of Charge Prediction

Operando Spatial Pressure Mapping Analysis for Prototype Lithium Metal Pouch Cells Under Practical Conditions

Operando monitoring of internal gas pressure in commercial lithium-ion batteries via a MEMS-assisted fiber-optic interferometer

Understanding the Effects of Uniform Stack Pressure in Extreme Fast Charging Lithium-Ion Batteries Via Operando X-Ray Diffraction

Unlocking Failure Mechanisms and Improvement of Practical Li–S Pouch Cells through In Operando Pressure Study

Operando Liquid Pressure Determination In Polymer Electrolyte Fuel Cells

Tracking Pressure Changes and Morphology Evolution of Lithium Metal Anodes

Unveiling the Three Stages of Li Plating and Dynamic Evolution Processes in Pouch C/LiFePO4 Batteries

How Does Stacking Pressure Affect the Performance of Solid Electrolytes and All‐Solid‐State Lithium Metal Batteries?

Operando detection of Li plating during fast charging of Li-ion batteries using incremental capacity analysis

Monitoring state of charge and volume expansion in lithium-ion batteries: an approach using surface mounted thin-film graphene sensors

Concurrent operando neutron imaging and diffraction analysis revealing spatial lithiation phase evolution in an ultra-thick graphite electrode

Operando Quantified Lithium Plating Determination Enabled by Dynamic Capacitance Measurement in Working Li‐Ion Batteries

High-Throughput Lithium Plating Quantification for Fast Charging Battery Design

High-throughput Li plating quantification for fast-charging battery design

Pressure-Driven Interface Evolution in Solid-State Lithium Metal Batteries

Mechanical behavior of Silicon-Graphite pouch cells under external compressive load: Implications and opportunities for battery pack design

Operando electron spin probes for the study of battery processes

Flow Cell for Simultaneous In Situ Analysis of Local Electrolyte Distribution and Porous Morphology within the Negative Electrode in a Lead-Acid Battery

Enhancing electrochemomechanics: How stack pressure regulation affects all-solid-state batteries

Accurate Internal Monitoring of Batteries by Embedded Piezoelectric Sensors