Abstract:Solid state batteries (SSBs) are promising next generation propulsion for electric vehicles due to their improved safety, high gravimetric and volumetric energy densities, and increased reliability. Silicon is one of the limited choices for the anode material for the SSBs due to its high applicable capacity, low operating potential and natural abundance. However, significant challenges remain for the commercialization of Si anode based SSBs, including the insufficient operational and calendar life, requirement of high stack pressure for operation, and inadequate fast charge capability. Almost each of the technical challenges associated with Si anode is entangled with the volume change of Si during charging and discharging. Si possesses high lithium storage capacity because it can form various Li x Si y compounds upon lithiation. For example, when 3.75 moles of Li + is added to 1 mole of Si, the compound Li 15 Si 4 is formed, which gives a capacity of 3578 mAh/gSi. What accompanies this is a considerable volume expansion (e.g., 280% increase for Li 15 Si 4 ), resulting from the reorganization of the compound crystals. Assuming an anode that initially composes of perfectly compacted Si particles, this volume expansion translates to a 56% increase in the thickness of the Si anode. In a practical SSB, the real thickness variation in the Si anode is expected to be smaller because of the architecture design of the anode. Nonetheless, this volume change in Si creates many problems, including the Si particle pulverization, delamination of electrode from the current collector and electrolyte separator, loss of electronic and ion conductions in the electrode, among others. To maintain the electric contact in Si anode based SSBs, high stack pressures, from several MPa to several tens of MPa, are normally applied. In this work, we carefully measure the real-time stack pressure in a specially designed setup. The stress-strain characteristics of Si anode based SSBs during operation, including the stack pressure spike and the degradation of the average stack pressure, is studied and correlated with the Si anode structure changes. Furthermore, different measures, including external and internal ones, are explored to improve the cell pressure control. The external measures include selecting an appropriate spring and using a mechanical buffer layer, while the internal measure refers to an elastic current collector design. As a result, a better SSB pressure control is obtained. More importantly, a reduction of the stack pressure significantly below 10 MPa without compromising the cell performance is achieved.

Enhancing electrochemomechanics: How stack pressure regulation affects all-solid-state batteries

How Does Stacking Pressure Affect the Performance of Solid Electrolytes and All‐Solid‐State Lithium Metal Batteries?

The effect of volume change and stack pressure on solid‐state battery cathodes

Critical Impact of Volume Changes in Sulfide-Based All-Solid-State Batteries Operating Under Practical Conditions

Interrogating the Role of Stack Pressure in Transport‐Reaction Interaction in the Solid‐State Battery Cathode

Multiphysics modeling of the influence of initial pressure on mechanical and electrochemical performance of all-solid-state batteries

Stack Pressure Considerations for Room Temperature All-Solid-State Lithium Metal Batteries

Effect of Uniaxial Stack Pressure on the Performance of Nanocrystalline Electrolytes and Electrode Composites for All-Solid-State Fluoride-Ion-Batteries

Stacking pressure homogenizes the electrochemical lithiation reaction of silicon anode in solid-state batteries

Investigation and Improvement of the Pressure Control in Si Anode Based Solid-State Batteries

A review of the effect of external pressure on all-solid-state batteries

The Stack Pressure Dilemma in Sulfide Electrolyte Based Li Metal Solid‐State Batteries: A Case Study with Li6PS5Cl Solid Electrolyte

Pressure Effects and Countermeasures in Solid‐State Batteries: A Comprehensive Review

Enabling Uniform and Accurate Control of Cycling Pressure for All-Solid-State Batteries

Stack Pressure Enhanced Size Threshold of Si Anode Fracture in All‐Solid‐State Batteries

A Fully Coupled Mechano-Electrochemical Model for All-Solid-State Thin-Film Li-Ion Batteries with Non-Porous Electrodes: Effects of Chemo-Mechanical Expansions on Battery Performance and Optimization Strategies for Stress Evolution

Mechanical investigations of composite cathode degradation in all-solid-state-batteries

Effects of stack pressure on the equivalent circuit model of lithium-ion batteries

Mechanical Investigations of Composite Cathode Degradation in All-Solid-State Batteries

Understanding the Mechanical Behavior of Sulfide Solid Electrolyte Membranes for Practical Applications in All-Solid-State Batteries

Boosting the Performance of Sb2Se3 Cathode‐Based All‐Solid‐State Batteries by Carbon Coating