Abstract:Achieving compatibility between cell components is one of the major challenges for the widespread adoption of bulk-type solid-state batteries. In particular, superionic lithium thiophosphate solid electrolytes suffer from oxidation at high voltages when interfaced with state-of-the-art cathode materials. Here, we report on atomic layer deposition (ALD) of conformal HfO2 nanocoatings onto LiNi0.85Co0.10Mn0.05O2 (NCM-851005) cathode material. Based on electrochemical testing in high-loading (pellet-stack) solid-state battery cells, we demonstrate the positive effect of ALD HfO2 coating on the cyclability and stability of NCM-851005. Modification of the coating morphology by postannealing further improved the cycling performance considerably, especially the Coulombic efficiency in the initial cycles and the rate capability. The results demonstrate the ability of ALD to produce high-quality surface films on industrially relevant electrode materials, thus providing a suitable platform for systematic investigations into the functionality of protective coatings in solid-state and other batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01487.Cycling performance of the NCM-851005 coated by ALD of TEMAH/H2O or TEMAH/O3 (for 0, 10, 20, and 100 ALD cycles); HfO2 content from ICP-OES versus ALD cycles; XRD patterns collected from the NCM-851005 before/after coating and the Rietveld refinement profile for the bare NCM-851005; refined structural parameters; O 1s and Ni 2p core-level spectra for the bare and HfO2-coated NCM-851005 before/after heating; high- and low-magnification SEM images of the bare and HfO2-coated NCM-851005 before/after heating; XP spectra of the Hf 4d and 4f core-level regions for the HfO2-coated NCM-851005 before/after heating; calculation of lattice spacings from HRTEM images; determination of the coating thickness, EDS data, and mapping results for the annealed HfO2-coated NCM-851005; cycling performance of bare NCM-851005 in liquid-electrolyte-based LIB coin cells; cycling performance of the O3-treated (uncoated) NCM-851005 before/after heating in SSB cells; cross-sectional SEM imaging and EDS mapping of the cathode and cathode/separator interface of SSB cells using the annealed HfO2-coated NCM-851005 before/after cycling (PDF)This article has not yet been cited by other publications.

Conformal Li 2 HfO 3 /HfO 2 Nanoparticle Coatings on Layered Ni-Rich Oxide Cathodes for Stabilizing Interfaces in All-Solid-State Batteries

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries

Formation of an Artificial Cathode–Electrolyte Interphase to Suppress Interfacial Degradation of Ni-Rich Cathode Active Material with Sulfide Electrolytes for Solid-State Batteries

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Protective Nanosheet Coatings for Thiophosphate‐Based All‐Solid‐State Batteries

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Atomic Layer Deposition Derived Zirconia Coatings on Ni‐Rich Cathodes in Solid‐State Batteries: Correlation Between Surface Constitution and Cycling Performance

Heuristic Design of Cathode Hybrid Coating for Power‐Limited Sulfide‐Based All‐Solid‐State Lithium Batteries

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide-Based All-Solid-State Batteries: The Role of Li10 SnP2 S12 Coating on Ni-Rich NCM Cathode

Lithiated polymer coating for interface stabilization in Li6PS5Cl-based solid-state batteries with high-nickel NCM

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

High Lithium-Ion Conductivity, Halide-Coated, Ni-Rich NCM Improves Cycling Stability in Sulfide All-Solid-State Batteries

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials