Abstract:Uniform ZrO(OH)2 nanocoatings on Ni‐rich hydroxide precursors are achieved via a decomposition‐promoted precipitation (DPP) protocol. Gradient surface Zr doping and refined microstructure in products are achieved through the following lithiation. This integrated modulation suppresses side reactions and deleterious phase transition. Consequently, the cell delivers a high‐capacity retention of 87.2% over 200 harsh cycles at 0.2 C. Ni‐rich layered cathodes with ultrahigh nickel content (≥90%), for example LiNi0.9Co0.1O2 (NC0.9), are promising for next‐generation high‐energy Li‐ion batteries (LIBs), but face stability issues related to structural degradation and side reactions during the electrochemical process. Here, surface modulation is demonstrated by integrating a Li+‐conductive nanocoating and gradient lattice doping to stabilize the active cathode efficiently for extended cycles. Briefly, a wet‐chemistry process is developed to deposit uniform ZrO(OH)2 nanoshells around Ni0.905Co0.095(OH)2(NC0.9‐OH) hydroxide precursors, followed by high temperature lithiation to create reinforced products featuring Zr doping in the crust lattice decorated with Li2ZrO3 nanoparticles on the surface. It is identified that the Zr4+ infiltration reconstructed the surface lattice into favorable characters such as Li+ deficiency and Ni3+ reduction, which are effective to combat side reactions and suppress phase degradation and crack formation. This surface control is able to achieve an optimized balance between surface stabilization and charge transfer, resulting in an extraordinary capacity retention of 96.6% after 100 cycles at 1 C and an excellent rate capability of 148.8 mA h g−1 at 10 C. This study highlights the critical importance of integrated surface modulation for high stability of cathode materials in next‐generation LIBs.

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Revealing the surface-to-bulk degradation mechanism of nickel-rich cathode in sulfide all-solid-state batteries

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Al/Zr Synergetic Modification Tailored Low-Cobalt Single Crystal Lini0.72co0.05mn0.23o2 Cathode for High-Performance Lithium-Ion Battery

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

Synergistic Role of Sb Doping and Surface Modification in High Performance Ultrahigh-Nickel Layered Oxides Cathode Materials

Surface to Bulk Design Empowering Ni-rich Layered Oxide Cathode in Sulfide-Based All-Solid-State Batteries

Surface Engineering of Nickel-Rich Single-Crystal Layered Oxide Cathode Enables High-Capacity and Long Cycle-Life Sulfide All-Solid-state Batteries

Sb-anchoring Single-Crystal Engineering Enables Ultra-High-ni Layered Oxides with High-Voltage Tolerance and Long-Cycle Stability

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

Enabling the Strengthened Structural and Interfacial Stability of High‐Nickel LiNi0.9Co0.05Mn0.05O2 Cathode by a Coating‐Doping‐Microstructure Regulation Three‐In‐One Strategy

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Synergistic Doping Chemistry Enable the Cycling Properties of Single-Crystal Ni-rich Cathode for Lithium-Ion Batteries